Have you ever found yourself in a situation where you need to jump-start your 2017 Jeep Grand Cherokee, but you’re not quite sure where to locate the battery? Well, look no further! In this article, we’ll illuminate the mystery surrounding the battery’s whereabouts in your vehicle. Whether you’re a seasoned car enthusiast or simply looking to learn more about your prized possession, understanding the location of the battery is essential knowledge. So, without further ado, let’s delve into where exactly the battery lies in a 2017 Jeep Grand Cherokee.
Where is the Battery in a 2017 Jeep Grand Cherokee?
When it comes to maintaining your vehicle, knowing where to locate essential components is crucial. In the case of a 2017 Jeep Grand Cherokee, finding the battery is an essential part of routine maintenance, jump-starting, or replacing it when necessary. In this article, we will explore the precise location of the battery in a 2017 Jeep Grand Cherokee and provide you with the necessary information on how to access it.
The Battery in a 2017 Jeep Grand Cherokee
The battery in a 2017 Jeep Grand Cherokee is an integral part of the vehicle’s electrical system. It provides the necessary power to start the engine and supplies electricity to various components, including the lights, radio, and other electrical systems. In the Grand Cherokee, the battery is a crucial component for the overall performance of the vehicle.
Locating the Battery
To locate the battery in a 2017 Jeep Grand Cherokee, follow these steps:
- Open the hood of your Jeep Grand Cherokee.
- Locate the rectangular box on the right side of the engine compartment.
- This rectangular box is the Power Distribution Center (PDC), which houses the battery and other essential electrical components.
- Within the PDC, you’ll find a plastic cover that protects the battery.
- Remove the plastic cover to access the battery.
Removing the Plastic Cover
Removing the plastic cover that protects the battery requires a few simple steps:
- Locate the two plastic clips on the front of the cover.
- Press down on the clips, releasing them from their locked position.
- Once the clips are released, lift the cover upward and set it aside.
It is essential to remember that before inspecting or working on the battery, you should ensure your vehicle’s engine is turned off, the key is removed from the ignition, and all accessories are turned off. Safety should always be a priority when handling any electrical components.
Inspecting the Battery
Regularly inspecting the battery can help you identify signs of wear or potential issues. Here are some essential aspects to check when inspecting the battery:
- Check for any signs of corrosion on the battery terminals and cables. Corrosion may appear as a white, green, or blue substance around the connections.
- Ensure that the battery cables are securely attached to the battery terminals.
- Examine the battery case for any swelling, cracks, or leaks. These may indicate a faulty or damaged battery.
If you notice any significant damage, leaks, or other signs of battery deterioration, it is recommended to have it checked by a professional mechanic or replace it if necessary.
Jump-Starting a 2017 Jeep Grand Cherokee
In the unfortunate event of a dead battery, you may need to jump-start your 2017 Jeep Grand Cherokee. Here is a step-by-step guide on how to safely jump-start your vehicle:
- Park the vehicle with the functioning battery close to the front of your Jeep Grand Cherokee, but do not allow the vehicles to touch.
- Turn off the engine and all electrical accessories in both vehicles.
- Open the hoods of both vehicles and locate the batteries.
- Identify the positive and negative terminals on both batteries. The positive terminal is usually marked with a “+” symbol, while the negative terminal is marked with a “-” symbol.
- Connect the jumper cables in the following order:
- Connect one end of the red (positive) cable to the positive terminal of the dead battery.
- Connect the other end of the red (positive) cable to the positive terminal of the functional battery.
- Connect one end of the black (negative) cable to the negative terminal of the functional battery.
- Connect the other end of the black (negative) cable to a grounded metal surface on the engine block of the dead vehicle. Choose a surface away from the battery to reduce the risk of sparks.
- Start the engine of the vehicle with the functional battery and let it run for a few minutes.
- Attempt to start your Jeep Grand Cherokee. If it doesn’t start, wait a few more minutes and try again.
- Once the dead vehicle starts, remove the jumper cables in the reverse order of how they were connected.
- Allow both vehicles to run for a few minutes before disconnecting the cables completely.
It is crucial to note that jump-starting a vehicle should not be a regular practice. If your battery consistently requires a jump-start, it may be time to replace it.
Replacing the Battery
Over time, batteries can lose their effectiveness and need to be replaced. If you find that your 2017 Jeep Grand Cherokee’s battery no longer holds a charge or exhibits signs of deterioration, it may be time for a replacement. Here are the steps to follow when replacing the battery:
- Ensure the engine and all accessories are turned off.
- Remove the plastic cover from the Power Distribution Center (PDC) as mentioned earlier.
- Disconnect the negative (black) battery cable from the battery terminal by loosening the nut with a wrench or socket.
- Repeat the same process for the positive (red) battery cable.
- Remove any additional brackets or hold-downs securing the battery in place, if applicable.
- Lift the old battery out of the battery tray and set it aside.
- Place the new battery into the battery tray, ensuring it is properly aligned.
- Reattach any brackets or hold-downs that were previously removed.
- Connect the positive (red) battery cable to the positive terminal and tighten the nut.
- Connect the negative (black) battery cable to the negative terminal and tighten the nut.
- Double-check all connections to ensure they are secure.
- Close the hood and start the vehicle to confirm that the new battery is functioning correctly.
If you are unsure about replacing the battery yourself, it is always recommended to seek assistance from a professional mechanic.
In conclusion, the battery in a 2017 Jeep Grand Cherokee is located within the Power Distribution Center (PDC) under the hood. It is essential to know its location for maintenance, jump-starting, or replacing purposes. By following the outlined steps, you can easily access the battery, inspect it for signs of wear, jump-start the vehicle when needed, or replace it if necessary. Remember to prioritize safety and consult a professional if you are unsure about any aspect of the process.
Frequently Asked Questions
Where is the battery located in a 2017 Jeep Grand Cherokee?
The battery in a 2017 Jeep Grand Cherokee is located in the engine compartment.
How do I access the battery in a 2017 Jeep Grand Cherokee?
To access the battery in a 2017 Jeep Grand Cherokee, follow these steps:
- Open the hood of the vehicle.
- Locate the battery, which is typically positioned on the driver’s side of the engine compartment.
- Remove the plastic cover or battery tray if present, using the appropriate tools.
- Disconnect the negative (-) battery cable by loosening the nut and removing it from the battery terminal.
- Disconnect the positive (+) battery cable in the same manner.
- Remove any securing brackets or fasteners holding the battery in place.
- Lift the battery out of the compartment, taking care to support its weight.
What size battery does a 2017 Jeep Grand Cherokee use?
The 2017 Jeep Grand Cherokee typically uses a Group 65 battery, which is a common size for many vehicles.
Can I replace the battery in my 2017 Jeep Grand Cherokee myself?
Yes, you can replace the battery in your 2017 Jeep Grand Cherokee yourself. However, if you are unsure or uncomfortable performing the replacement, it is recommended to seek assistance from a professional or authorized Jeep dealer to ensure proper installation.
How often should the battery in a 2017 Jeep Grand Cherokee be replaced?
The lifespan of a battery can vary depending on various factors such as usage and climate conditions. On average, a car battery tends to last between 3 to 5 years. However, it is advisable to monitor the battery’s performance regularly and have it tested if you experience any issues starting the vehicle.
Final Thoughts
The battery in a 2017 Jeep Grand Cherokee is located in the engine compartment. It can be found on the right-hand side, towards the front of the vehicle. To access the battery, simply open the hood and look for the black plastic cover with a positive (+) and negative (-) sign marked on it. Remove the cover to reveal the battery. Remember to always take necessary safety precautions, such as wearing gloves and eye protection, when working with the battery. So, if you’re wondering, “Where is the battery in a 2017 Jeep Grand Cherokee?” look no further! It’s in the engine compartment, conveniently located for easy maintenance.
