Is your Subaru key battery running low? Don’t worry, replacing it is a simple task you can do on your own. In this article, we’ll guide you through the process of how to replace the battery in your Subaru key. Even if you’re not particularly tech-savvy, fear not, as we’ll break it down step by step. So, let’s get started with replacing your Subaru key battery and ensure you can continue using your key without any inconvenience.
How to Replace Your Subaru Key Battery
Is your Subaru key fob running out of juice? Don’t worry, replacing the battery is a simple task that you can easily do yourself. In this guide, we’ll walk you through the process step by step to ensure a smooth battery replacement for your Subaru key. By following these instructions, you’ll have your key fob working like new in no time!
Gather Your Tools
Before you begin, make sure you have the necessary tools to complete the battery replacement. You’ll need:
- Small flathead screwdriver or a coin
- New CR2032 battery
Locate the Battery Compartment
First, you need to find the battery compartment on your Subaru key fob. The location may vary depending on the model and year of your Subaru. Generally, the battery compartment is on the backside of the key fob. Look for a small indentation or a groove where you can insert a tool to open the compartment.
Step 1: Open the Battery Compartment
Using a small flathead screwdriver or a coin, gently insert it into the groove or indentation on the key fob. Apply a little pressure and twist the tool to pop open the battery compartment cover. Be careful not to use excessive force to avoid damaging the key fob.
Step 2: Remove the Old Battery
Once the battery compartment is open, you’ll see the CR2032 battery. Carefully remove the old battery, taking note of its orientation. Pay attention to which side is facing up as you’ll need to insert the new battery in the same way.
Step 3: Insert the New Battery
Take your new CR2032 battery and align it properly according to the orientation of the old battery. Make sure the positive (+) side is facing up. Gently place the new battery into the battery compartment. Press it down to ensure a secure fit.
Step 4: Close the Battery Compartment
With the new battery in place, it’s time to close the battery compartment cover. Align the cover properly and press it down until you hear a satisfying click. Ensure that the cover is securely fastened to prevent the battery from falling out.
Testing the Key Fob
Now that you’ve replaced the battery, it’s essential to test if your key fob is working correctly. Follow these steps to ensure everything is functioning as expected:
Step 1: Test the Buttons
Press various buttons on the key fob to check if they are responding. Test the lock, unlock, trunk release, and panic buttons to verify their functionality. If any of the buttons are not working, double-check if the battery is properly inserted and try again.
Step 2: Check the Remote Start
If your Subaru key fob has a remote start feature, test it to confirm that it is operational. Follow the instructions in your Subaru owner’s manual on how to use the remote start function. If it doesn’t work, check the battery orientation and retry.
Additional Tips
Here are a few additional tips to keep in mind while replacing your Subaru key battery:
- Always use the correct battery type for your key fob. In most cases, Subaru key fobs require a CR2032 battery, but it’s best to consult your owner’s manual to confirm. Using the wrong battery can damage your key fob.
- If you don’t have a small flathead screwdriver, you can use a coin like a quarter or a dime to open the battery compartment.
- Dispose of the old battery responsibly by recycling it at a designated battery recycling location.
- Consider replacing the battery in all of your Subaru key fobs at the same time to avoid future disruptions.
By following these instructions and tips, you can easily replace the battery in your Subaru key fob. Remember to always refer to your specific Subaru model’s owner’s manual for any additional guidance or instructions. With a fresh battery, your key fob will continue to provide convenient access to your Subaru and all its features. Happy driving!
Frequently Asked Questions
How do I replace the battery in my Subaru key?
To replace the battery in your Subaru key, please follow these steps:
What type of battery does a Subaru key fob use?
A Subaru key fob typically uses a CR2032 lithium coin cell battery.
Where is the battery compartment located on a Subaru key?
The battery compartment in a Subaru key is usually located on the backside of the key fob. It can be accessed by sliding or prying open the cover.
Do I need any special tools to replace the Subaru key battery?
No, you do not need any special tools to replace the Subaru key battery. A small flat-head screwdriver or a coin can be used to open the battery compartment and replace the battery.
What are the steps to replace the battery in a Subaru key fob?
Here is a step-by-step guide to replacing the battery in your Subaru key fob:
- Locate the battery compartment on the backside of the key fob.
- Use a small flat-head screwdriver or a coin to open the battery compartment cover.
- Remove the old battery from the compartment.
- Insert a new CR2032 lithium coin cell battery into the compartment, making sure the positive (+) side is facing up.
- Close the battery compartment cover and ensure it is securely fastened.
How often should I replace the battery in my Subaru key?
The frequency of battery replacement in a Subaru key depends on the usage and battery life. It is recommended to replace the battery if you notice any signs of a weak or failing battery, such as reduced range or difficulty in operating the key fob.
Final Thoughts
To replace the battery in your Subaru key, follow these simple steps. First, locate the small slot on the side of the key fob and use a small flat-head screwdriver or a coin to gently pry it open. Inside, you will find the old battery. Carefully remove it and replace it with a new CR2025 battery, making sure the positive (+) side is facing up. Close the key fob by aligning the two halves and pressing them together firmly. That’s it! Now your Subaru key is ready to go with its new battery. Remember, regular battery replacement ensures smooth functioning of your key and avoids any inconvenience in the future. So, if you ever need to replace your Subaru key battery, just follow these steps. It’s quick, easy, and will keep your key working perfectly.
