Looking to replace your relic watch battery? Look no further! We’ve got you covered with a simple solution that will have your watch ticking again in no time. In this article, we’ll walk you through the step-by-step process of how to replace a relic watch battery, ensuring that you can enjoy the timeless beauty of your timepiece for years to come. So, if you’re ready to give your watch a new lease on life, let’s dive right in!
How to Replace Relic Watch Battery
If your Relic watch has stopped ticking and the hands aren’t moving, it may be time to replace the battery. Replacing the battery in a Relic watch can be a simple process, as long as you have the right tools and follow the correct steps. In this article, we will guide you through the process of replacing a Relic watch battery, ensuring that your watch is back up and running in no time.
Gather the Required Tools
Before you begin replacing the battery in your Relic watch, make sure you have the following tools on hand:
- Small screwdriver set
- Watch case opener tool
- Replacement battery
- Tweezers
- Cotton gloves (optional)
Having these tools ready will make the process smoother and more efficient.
Identify the Type of Battery
The first step in replacing the battery is to determine the type of battery your Relic watch requires. Relic watches typically use standard coin-shaped batteries, such as CR2016 or SR626SW. You can find this information in the user manual or on the back of the watch itself. Look for any markings or engravings that indicate the battery type.
Prepare the Workspace
Creating the right workspace is crucial to ensure that you can handle the small components of the watch without losing or damaging them. Follow these steps to prepare your workspace:
- Clean a flat and well-lit surface to work on.
- Place a soft cloth or microfiber towel on the surface to protect the watch from scratches.
- Put on a pair of cotton gloves to avoid leaving fingerprints or smudges on the watch.
Open the Watch Case
Now that you have prepared the necessary tools and workspace, it’s time to open the watch case. Follow these steps to open the watch case:
- Examine the back of the watch to identify the type of case back it has. Relic watches typically have a snap-off or screw-off case back.
- If your watch has a snap-off case back, use a watch case opener tool to carefully pry open the case back. Insert the case opener tool into the gap between the case back and the watch body, and gently apply pressure to pop it open.
- If your watch has a screw-off case back, use a small screwdriver or a specialized case back opener tool with notches that match the case back screws. Insert the tool into the slots and turn counterclockwise to unscrew the case back.
Remove the Old Battery
With the watch case open, you can now remove the old battery. Follow these steps:
- Locate the battery compartment. The battery is typically held in place by a small metal clip or bracket.
- Use a pair of tweezers to carefully lift the metal clip or bracket that secures the battery.
- Once the clip or bracket is lifted, use the tweezers to gently remove the old battery from the compartment. Pay attention to the battery’s orientation and make note of the positive (+) and negative (-) sides.
- Dispose of the old battery properly according to local regulations.
Insert the New Battery
Now that you have removed the old battery, it’s time to insert the new one. Follow these steps:
- Take the new battery and check its orientation. Match the positive (+) and negative (-) symbols on the battery with the markings inside the battery compartment.
- Using the tweezers, carefully place the new battery into the compartment, ensuring it is properly seated.
- If there was a metal clip or bracket holding the old battery, gently press it back into place to secure the new battery.
Close the Watch Case
With the new battery in place, it’s time to close the watch case. Follow these steps:
- If your watch has a snap-off case back, align it with the watch body and press firmly until you hear a click, indicating that it is securely closed.
- If your watch has a screw-off case back, use a small screwdriver or the case back opener tool to tighten the screws by turning them clockwise until they are snug.
Test the Watch
Now that the battery is replaced and the watch case is closed, it’s time to test the watch. Press the crown or any buttons on the watch to see if the hands start moving and the watch functions properly. If everything is working as expected, congratulations! You have successfully replaced the battery in your Relic watch.
Remember, if you encounter any difficulties during the process or if the watch still doesn’t work after replacing the battery, it’s recommended to seek assistance from a professional watchmaker or jeweler. They have the expertise and specialized tools to handle more complex issues with your watch.
Replacing the battery in your Relic watch is a simple task that can save you time and money compared to taking it to a repair shop. With the right tools and careful attention to detail, you can enjoy your Relic watch for years to come.
Frequently Asked Questions
How do I replace the battery in my Relic watch?
To replace the battery in your Relic watch, follow these steps:
What tools do I need to replace the battery in my Relic watch?
You will need a few tools to replace the battery in your Relic watch:
- Small flathead screwdriver
- Tweezers
- Watch case opener or knife
- New watch battery
Can I replace the battery in my Relic watch myself, or should I take it to a professional?
You can replace the battery in your Relic watch yourself if you have the necessary tools and feel comfortable doing so. However, if you are unsure or uncomfortable with the process, it is recommended to take your watch to a professional watchmaker or jeweler.
How do I open the case of my Relic watch to access the battery?
To open the case of your Relic watch, use a watch case opener or a knife with a thin blade. Insert the tool into the gap between the case back and the watch body, and gently twist or pry the case back open.
How do I remove the old battery from my Relic watch?
Once you have opened the case, you will see the battery inside. Use the tweezers to carefully remove the old battery from its compartment. Make sure to note the positioning and orientation of the battery before removing it.
How do I install a new battery in my Relic watch?
After removing the old battery, take the new battery and place it in the same position and orientation as the old one. Use the tweezers to ensure it is securely in place.
What should I do if I encounter any difficulties or have further questions while replacing the battery in my Relic watch?
If you encounter any difficulties or have further questions while replacing the battery in your Relic watch, it is best to seek assistance from a professional watchmaker or jeweler who can provide guidance and expertise.
Final Thoughts
To replace a relic watch battery, follow these simple steps. First, gather the necessary tools: a small screwdriver, a new battery, and a soft cloth. Next, locate the battery compartment on the back of the watch and carefully remove the screws. Once the cover is off, carefully remove the old battery and replace it with the new one, making sure to match the positive and negative ends correctly. Finally, reattach the cover and tighten the screws. With these straightforward steps, replacing a relic watch battery can be easily accomplished by anyone.
