Is your Subaru Outback key fob battery running low? No worries, we’ve got you covered on how to replace the battery in your Subaru Outback key fob. With just a few simple steps, you’ll have your key fob working like new again. Say goodbye to the frustration of a weak or dead battery, and say hello to convenience and peace of mind. In this article, we’ll walk you through the process of replacing the battery in your Subaru Outback key fob, so you can get back on the road with ease. Let’s dive right in!

How to Replace Battery in Subaru Outback Key Fob—Quick & Easy Guide

How to Replace the Battery in Your Subaru Outback Key Fob

Introduction

Your Subaru Outback key fob is an essential component that allows you to remotely lock and unlock your vehicle, as well as activate the panic alarm. Over time, the battery in your key fob may become depleted, requiring a replacement. In this article, we will guide you through the process of replacing the battery in your Subaru Outback key fob, ensuring that you can continue to enjoy the convenience and functionality it provides.

Gather the Necessary Tools

Before you begin, make sure you have the following tools ready:

  • Small flat-head screwdriver or similar tool
  • New CR2032 battery

Locate the Battery Compartment

The battery compartment of the Subaru Outback key fob is typically located on the backside of the fob. To access the compartment, follow these steps:

  1. Hold the key fob with the buttons facing down.
  2. Look for a small indentation or slot on the edge of the key fob.
  3. Insert the small flat-head screwdriver or similar tool into the slot.
  4. Gently twist the screwdriver to pry open the key fob.

Remove the Old Battery

Once you have opened the key fob, it’s time to remove the old battery. Here’s what you need to do:

  1. Locate the battery inside the compartment.
  2. Identify the metal clip or holder that secures the battery in place.
  3. Use your fingers or the screwdriver to carefully lift the metal clip.
  4. Remove the old battery from the compartment.

Insert the New Battery

With the old battery removed, it’s time to install the new one. Follow these steps:

  1. Take the new CR2032 battery out of its packaging.
  2. Ensure that the positive (+) side of the battery is facing up.
  3. Insert the new battery into the battery compartment, fitting it into place.
  4. Press down on the metal clip or holder to secure the battery.

Reassemble the Key Fob

Now that you have replaced the battery, it’s time to put the key fob back together. Here’s how:

  1. Carefully align the two halves of the key fob.
  2. Gently press them together until they snap into place.
  3. Give the key fob a firm squeeze to ensure it is securely closed.

Test the Key Fob

After reassembling the key fob, it’s important to test its functionality. Follow these steps to ensure that everything is working correctly:

  1. Stand near your Subaru Outback.
  2. Press any button on the key fob to check if it locks or unlocks the vehicle.
  3. Test the panic alarm button to ensure it activates the alarm system.

Additional Tips and Considerations

To further assist you in replacing the battery in your Subaru Outback key fob, here are some additional tips and considerations:

  • Always use a new CR2032 battery to ensure optimal performance.
  • If the key fob does not seem to be working after replacing the battery, try reinserting the battery or cleaning the battery contacts.
  • If you are having trouble opening the key fob, consult your vehicle’s owner’s manual or seek assistance from a professional.
  • It’s a good idea to keep spare batteries on hand so that you can quickly replace the battery if it becomes depleted again.

Replacing the battery in your Subaru Outback key fob is a straightforward process that can be done at home with minimal tools. By following the steps outlined in this article, you can ensure that your key fob continues to function properly, allowing you to conveniently control your vehicle’s locking and unlocking functions. Remember to always use a new CR2032 battery and test the key fob after replacing the battery to verify its functionality.

Frequently Asked Questions

How do I replace the battery in my Subaru Outback key fob?

Replacing the battery in your Subaru Outback key fob is a simple process. Follow the steps below:

What type of battery does the Subaru Outback key fob use?

The Subaru Outback key fob uses a CR2032 3-volt lithium coin cell battery. Make sure to use this specific type of battery for proper functioning.

Where is the battery located in the Subaru Outback key fob?

The battery in the Subaru Outback key fob is located inside the key fob casing. You will need to open the key fob to access and replace the battery.

How do I open the Subaru Outback key fob to replace the battery?

To open the Subaru Outback key fob, follow these steps:

  1. Locate the small indentation on the key fob casing.
  2. Insert a small flathead screwdriver or a similar tool into the indentation.
  3. Gently twist or pry the screwdriver to separate the key fob casing into two halves.

How do I remove the old battery from the Subaru Outback key fob?

Once you have opened the key fob, you can remove the old battery by following these steps:

  1. Identify the battery compartment inside the key fob.
  2. Using your fingers or a small tool, carefully lift the old battery out of the compartment.

How do I install a new battery in the Subaru Outback key fob?

To install a new battery in the Subaru Outback key fob, follow these steps:

  1. Ensure the new battery is oriented correctly, with the positive (+) side facing up.
  2. Place the new battery into the battery compartment of the key fob.
  3. Press down gently to secure the battery in place.

Final Thoughts

To replace the battery in your Subaru Outback key fob, follow these simple steps. Firstly, locate the small slot on the edge of the key fob and use a flathead screwdriver or a coin to gently pry it open. Next, carefully remove the old battery and replace it with a new one, ensuring that the polarities match. Finally, snap the key fob back together and test it to ensure functionality. By following these steps, you can easily replace the battery in your Subaru Outback key fob and continue using it without any issues. So, when it comes to replacing the battery in your Subaru Outback key fob, these steps will help you do it effortlessly.