Looking to replace a switch battery but not sure where to start? We’ve got you covered! In this article, we’ll walk you through the simple steps to seamlessly replace a switch battery. From gathering the necessary tools to safely removing and installing the battery, you’ll learn everything you need to know. So, whether you’re a DIY enthusiast or just looking to save some money on technical services, this guide on how to replace a switch battery has got you covered. Let’s dive in!
How to Replace a Switch Battery: A Step-by-Step Guide
Switch consoles are a popular choice for gamers of all ages. But like any electronic device, the battery will eventually need to be replaced. In this comprehensive guide, we’ll walk you through the process of replacing the battery in your switch console. Whether you’re a seasoned gamer or new to the switch, this step-by-step tutorial will help you keep your console powered up and ready to play.
Understanding Switch Batteries
Before we dive into the battery replacement process, it’s important to understand the type of battery used in a Nintendo Switch. The Switch console uses a rechargeable lithium-ion battery, which provides hours of gameplay on a single charge. Over time, the battery’s capacity will decrease, leading to shorter battery life and more frequent charging. When this happens, it’s time to replace the battery.
Tools and Materials Needed
To replace the battery in your switch console, you’ll need a few tools and materials. Here’s a list of everything you’ll need:
- Tri-wing screwdriver
- Phillips screwdriver
- Replacement battery
- Spudger or plastic pry tool
- Tweezers
- Cotton swabs
- Isopropyl alcohol (70% or higher)
Make sure you have all the necessary tools and materials before getting started. This will ensure a smooth and efficient battery replacement process.
Step 1: Power Off the Switch and Remove the Joy-Con Controllers
Before you begin replacing the battery, make sure the switch console is powered off. To do this, press and hold the power button on the top of the console until the power menu appears. Select “Power Options” and then “Turn Off.”
Once the switch is powered off, remove the Joy-Con controllers by sliding them upwards. Set the controllers aside in a safe place.
Step 2: Remove the Back Cover
With the Joy-Con controllers removed, flip the switch console over so that the back cover is facing up. Use a tri-wing screwdriver to remove the four screws securing the back cover. Once the screws are removed, carefully pry the back cover off using a spudger or plastic pry tool. Take your time and apply gentle pressure to avoid damaging the console.
Step 3: Disconnect the Battery
Inside the switch console, you’ll see the battery connected to the mainboard by a cable. Use a pair of tweezers to carefully disconnect the cable from the connector on the mainboard. Take note of how the cable is connected so that you can easily reconnect it later.
Step 4: Remove the Old Battery
Once the battery cable is disconnected, you can safely remove the old battery from the console. Use a spudger or plastic pry tool to gently lift the battery from the adhesive securing it to the console. Take care not to bend or puncture the battery during removal.
Step 5: Clean the Battery Compartment
With the old battery removed, it’s a good idea to clean the battery compartment before installing the new battery. Dampen a cotton swab with isopropyl alcohol and carefully clean any dirt or residue from the compartment. Allow the compartment to dry completely before proceeding.
Step 6: Install the New Battery
Take the new battery and align it with the battery compartment in the switch console. Press down firmly to secure the adhesive side of the battery to the console. Make sure the battery is properly aligned and seated in the compartment.
Step 7: Reconnect the Battery
Next, reconnect the battery cable to the connector on the mainboard. Refer to the notes or pictures you took earlier to ensure the cable is connected correctly. Gently press the cable into the connector until it is securely in place.
Step 8: Replace the Back Cover
Carefully align the back cover with the switch console and press it down until it snaps into place. Use a tri-wing screwdriver to reinsert and tighten the four screws that secure the back cover.
Step 9: Reattach the Joy-Con Controllers
Flip the switch console back over and reattach the Joy-Con controllers. Slide the controllers onto the rails on either side of the console until they click into place. Ensure that the controllers are securely attached.
Step 10: Power On and Test
Finally, power on the switch console by pressing the power button. If the battery replacement was successful, the console should power on normally. Use the console as you normally would and check that the battery is charging and holding a charge.
Congratulations! You’ve successfully replaced the battery in your switch console. With a fresh battery installed, you can enjoy hours of uninterrupted gameplay.
Remember, if you’re uncomfortable with performing the battery replacement yourself, it’s always a good idea to seek professional assistance.
Frequently Asked Questions
How do I replace the battery in a switch?
To replace the battery in a switch, follow these steps:
What type of battery does the switch use?
The switch typically uses a CR2032 lithium coin cell battery. Check the user manual or the back of the switch to confirm the exact battery type.
How do I access the battery compartment in a switch?
To access the battery compartment, locate the small panel or cover on the back of the switch. Use a screwdriver or coin to open the compartment.
Do I need any special tools to replace the switch battery?
No, you usually don’t need any special tools. In most cases, a small screwdriver or coin is sufficient to open the battery compartment.
What should I do if the switch doesn’t turn on after replacing the battery?
If the switch doesn’t turn on after replacing the battery, ensure that the battery is inserted correctly, with the positive (+) and negative (-) sides aligned correctly. If the issue persists, try using a different battery or contact the manufacturer for further assistance.
How often should I replace the battery in a switch?
The frequency of battery replacement depends on the usage and the specific switch model. Generally, a switch battery can last for several months to a year. Monitor the switch’s performance and replace the battery when it becomes weak or fails to power the switch.
Final Thoughts
Replacing a switch battery is a simple process that can be done in a few easy steps. First, turn off the switch and remove the back cover. Locate the battery compartment and carefully remove the old battery. Insert the new battery, ensuring it is properly aligned. Replace the back cover, turn on the switch, and test to ensure it is working correctly. By following these steps, you can easily replace a switch battery and keep your device functioning smoothly. So, if you need to replace a switch battery, just follow these steps and you’ll have it done in no time.