• Post author:
  • Post category:Guide

Having a dead battery in your Cadillac ATS can be a frustrating experience, especially when you need to access the trunk. But fear not, because the solution to your problem is right here: learn how to open the Cadillac ATS trunk with a dead battery. In this article, we will guide you through the simple steps you need to take to regain access to your trunk, so you can retrieve your belongings or jump-start your vehicle. Whether you’re stranded on the roadside or just looking for a quick fix, we’ve got you covered. Let’s dive in and find out how to open the Cadillac ATS trunk with a dead battery.

Unlock Cadillac ATS Trunk with Dead Battery: Easy Steps

How to Open Cadillac ATS Trunk with Dead Battery

Introduction

The Cadillac ATS is a popular luxury sedan known for its sleek design and advanced features. However, like any vehicle, it can encounter unexpected issues such as a dead battery. Opening the trunk of a Cadillac ATS with a dead battery might seem like a challenge, but there are several methods you can try. In this article, we will explore different techniques to open the Cadillac ATS trunk regardless of its power status.

Method 1: Using the Key Fob

One of the easiest ways to open the trunk of a Cadillac ATS is by using the key fob. Most key fobs have a dedicated button or symbol for opening the trunk. Here’s how you can do it:

  1. Locate the key fob and identify the trunk release button. It is usually represented by an icon of an open trunk.
  2. Make sure you are within range of the car, typically around 15-20 feet.
  3. Press and hold the trunk release button on the key fob for a few seconds.
  4. If the trunk release mechanism is still functional, the trunk should open.

This method relies on the key fob’s battery being charged. If the key fob’s battery is also dead, you will need to try an alternative method.

Method 2: Using the Trunk Release Button

If the key fob is not working due to a dead battery, you can try opening the trunk using the trunk release button located inside the car. Here’s what you need to do:

  1. Enter the vehicle through the front doors.
  2. Locate the trunk release button. In Cadillac ATS models, it is often found near the driver’s seat or in the center console area.
  3. Press and hold the trunk release button for a few seconds.
  4. If the trunk release mechanism is functioning properly, the trunk should unlock and open.

It is important to note that some Cadillac ATS models may not have a dedicated trunk release button inside the car. In such cases, you will need to try an alternative method.

Method 3: Using the Manual Trunk Release

In rare situations where both the key fob and the trunk release button inside the car do not work, you can manually release the trunk using the emergency trunk release lever. Follow these steps:

  1. Open the rear seat access door, usually located behind the center armrest in the back seat area.
  2. Look for a small handle or lever inside the opening.
  3. Pull the lever or handle firmly to release the trunk latch.
  4. Once the latch is released, go to the back of the vehicle and lift the trunk lid manually.

It’s important to remember that the location of the emergency trunk release lever may vary slightly depending on the year and model of your Cadillac ATS. Refer to the vehicle’s manual for specific instructions and illustrations.

Method 4: Jump-Start the Battery

If your Cadillac ATS has a dead battery and you want to open the trunk to access it or jump-start the vehicle, you may try using jumper cables to power the trunk release mechanism. Here’s what you need to do:

  1. Obtain a set of jumper cables and a working vehicle with a charged battery.
  2. Position the vehicles close enough for the jumper cables to reach both batteries.
  3. Connect the positive terminals of both batteries with the red jumper cable.
  4. Connect the negative terminal of the working vehicle’s battery with a metal surface on the dead Cadillac ATS, away from the battery.
  5. Start the working vehicle and let it run for a few minutes to charge the dead battery.
  6. After a few minutes, attempt to open the trunk using one of the previously mentioned methods.

By jump-starting the dead battery, you provide power to the electrical system of the Cadillac ATS, including the trunk release mechanism. This method can be quite effective in situations where the battery is completely drained.

Experiencing a dead battery in your Cadillac ATS can be frustrating, especially if you need to access the trunk. However, with the methods outlined in this article, you now have several options to open the trunk regardless of the battery’s condition. Whether it’s using the key fob, the trunk release button inside the car, the emergency trunk release lever, or jump-starting the battery, you can regain access to the trunk of your Cadillac ATS and address the underlying battery issue.

FAQs

Q: Can I use the trunk release button if my key fob battery is dead?

Yes, you can use the trunk release button inside the car even if your key fob battery is dead. The trunk release button operates independently of the key fob’s power source.

Q: Where can I find the emergency trunk release lever in my Cadillac ATS?

The emergency trunk release lever is typically located behind the rear seat access door, which is often positioned behind the center armrest in the back seat area. Refer to your vehicle’s manual for the exact location and instructions.

Q: What should I do if none of the methods work?

If none of the methods outlined in this article work, it is recommended to consult a professional mechanic or contact Cadillac customer support for further assistance. They will be able to diagnose and address any underlying electrical or mechanical issues causing the trunk to remain locked.

Frequently Asked Questions

How do I open the trunk of my Cadillac ATS with a dead battery?

To open the trunk of your Cadillac ATS when the battery is dead, you can follow these steps:

What tools do I need to open the trunk of a Cadillac ATS with a dead battery?

You don’t need any special tools to open the trunk of a Cadillac ATS with a dead battery. However, having a spare key fob or a key that can manually unlock the trunk would be helpful.

Can I manually unlock the trunk of a Cadillac ATS with a dead battery?

Yes, you can manually unlock the trunk of a Cadillac ATS with a dead battery. Look for a small keyhole located near the trunk release button on the exterior of the trunk. Use your spare key fob or physical key to insert it into the keyhole and turn it counterclockwise to unlock the trunk.

What should I do if I don’t have a spare key fob or a physical key?

If you don’t have a spare key fob or a physical key, you can try using the keyless entry keypad, if your Cadillac ATS is equipped with one. Look for a small keypad that is usually located near the driver’s side door handle. Enter the correct code to unlock the trunk. If you don’t know the code, refer to your owner’s manual or contact your local Cadillac dealership for assistance.

Is there any other way to open the trunk of a Cadillac ATS with a dead battery?

If you are still unable to open the trunk of your Cadillac ATS using the methods mentioned above, you may need to jump-start the battery. Once the battery has enough power, you should be able to use the trunk release button or key fob to open the trunk normally. If you are unfamiliar with jump-starting a car or don’t have the necessary equipment, it is recommended to seek professional assistance.

Final Thoughts

In conclusion, if you find yourself with a dead battery in your Cadillac ATS and need to access the trunk, there are a few simple steps you can take. First, locate the manual trunk release lever inside the vehicle. It is typically located near the driver’s seat or in the glove compartment. Once you have located it, pull the lever to release the trunk latch. Alternatively, you can also use the remote key fob to open the trunk if it is functioning properly. By following these steps, you can easily open the Cadillac ATS trunk with a dead battery.