Looking to replace the battery in your Subaru key fob? No worries, we’ve got you covered! Opening a Subaru key fob to replace the battery is a simple process that anyone can do with just a few steps. In this article, we’ll walk you through the easy and straightforward method to get your key fob back up and running in no time. So, if you’re wondering how to open a Subaru key fob to replace the battery, you’re in the right place! Let’s dive in and get started.
How to Open a Subaru Key Fob to Replace Battery
Introduction
The Subaru key fob is an essential component of your vehicle’s security system. It allows you to lock and unlock your car remotely, and in some cases, even start the engine with the push of a button. However, like any battery-powered device, the key fob’s battery will eventually need to be replaced. In this guide, we will walk you through the step-by-step process of opening a Subaru key fob to replace the battery, ensuring that you can continue to enjoy the convenience of keyless entry without any interruptions.
What You Will Need
Before you get started, make sure you have the following items on hand:
– Replacement battery: Check your vehicle’s manual or consult a Subaru dealership to determine the appropriate battery type for your key fob.
– Small flat-head screwdriver: This will be used to pry open the key fob.
– Towel or cloth: It’s always a good idea to have a soft surface nearby to place the key fob on while you work.
Step-by-Step Guide to Opening a Subaru Key Fob
Now that you have everything you need, let’s dive into the process of opening a Subaru key fob to replace the battery:
- Locate the key blade: On the back of the key fob, you will find a small release button. Press this button to slide out the key blade. Set the key blade aside as it is not required for the battery replacement process.
- Identify the battery compartment: With the key blade removed, you can now see the battery compartment on the back of the key fob. It is usually held together with small clips or screws.
- Use a small flat-head screwdriver: Take the small flat-head screwdriver and carefully insert it into the slot between the two halves of the key fob. Gently apply pressure to pry open the key fob. Be cautious not to use excessive force as it may damage the key fob or its components.
- Separate the key fob halves: Once you have successfully opened the key fob, you will notice that it consists of two halves. Carefully separate them, ensuring that you don’t pull on any delicate wires or components.
- Locate the old battery: Inside one of the key fob halves, you will find the old battery. Take note of its orientation and how it is positioned within the compartment.
- Remove the old battery: Gently pry out the old battery using your fingers or a small tool. Ensure that you dispose of it properly, following local regulations for battery disposal.
- Insert the new battery: Take the replacement battery and carefully position it in the same orientation as the old battery. Ensure that it fits securely in the compartment.
- Reassemble the key fob: Once the new battery is in place, align the two halves of the key fob and press them together. You should hear a satisfying click, indicating that the key fob is securely closed.
- Test the key fob: With the key fob reassembled, press the buttons to ensure they are working correctly. If the buttons are unresponsive, double-check the battery’s orientation and reposition it if necessary.
Additional Tips and Considerations
To make your battery replacement process even smoother, here are some additional tips and considerations:
- Handle the key fob with care: The key fob is a delicate electronic device, so it’s important to handle it gently to avoid any damage.
- Check your vehicle’s manual: If you are unsure about any steps or need further guidance, refer to your vehicle’s manual or contact a Subaru dealership for assistance.
- Keep spare batteries handy: It’s always a good idea to keep spare batteries for your Subaru key fob in case the need for a replacement arises unexpectedly.
- Regularly clean your key fob: Over time, dust and debris can accumulate in the key fob. Clean it periodically using a soft, lint-free cloth to ensure optimal performance.
Replacing the battery in your Subaru key fob is a simple task that can be easily done at home. By following the step-by-step instructions provided in this guide, you can save both time and money by avoiding a trip to the dealership. Remember to handle the key fob with care, use the correct battery type, and dispose of the old battery responsibly. With a fresh battery in your key fob, you can continue to enjoy the convenience of keyless entry and ensure the security of your Subaru vehicle.
Subaru Forester / Outback / Impreza Key Fob Battery Replacement – DIY
Frequently Asked Questions
How do I open a Subaru key fob to replace the battery?
To open a Subaru key fob and replace the battery, follow these steps:
What tools do I need to open a Subaru key fob?
To open a Subaru key fob, you’ll need a flathead screwdriver or a small pry tool.
Can I replace the battery in my Subaru key fob myself?
Yes, you can replace the battery in your Subaru key fob yourself. It is a simple process that you can do at home.
Are there any precautions I should take while opening the Subaru key fob?
When opening your Subaru key fob, be careful not to damage the plastic casing or the electronic components inside. Use a gentle force and take your time to avoid any mishaps.
Where can I find the battery in a Subaru key fob?
The battery in a Subaru key fob is usually located underneath the metal key blade. You will need to remove the key blade to access the battery compartment.
What type of battery is compatible with a Subaru key fob?
Subaru key fobs typically use CR2032 lithium coin batteries. It’s important to use the correct battery type to ensure proper functionality.
Final Thoughts
To open a Subaru key fob and replace the battery, follow these simple steps. First, locate the small indentation on the side of the key fob. Insert a small flathead screwdriver or a coin into the groove and twist gently to pop open the fob. Once opened, carefully remove the old battery and replace it with a new one of the same type. Then, align the two halves of the fob and press them firmly together until they click into place. Finally, test the key fob to ensure it is working properly. With this guide, you now know how to open a Subaru key fob to replace the battery.
