Looking to fix the door panel on your 2017 Dodge Charger? We’ve got you covered! In this article, we will walk you through the steps to get your door panel looking as good as new. Whether it’s a loose panel, a broken clip, or a damaged panel, we will provide you with the solution you need. So, if you’re wondering how to fix 2017 Dodge Charger door panel, keep reading to find out!
How to Fix a 2017 Dodge Charger Door Panel
Is the door panel of your 2017 Dodge Charger in need of repair? Has it become loose, damaged, or simply worn out over time? Don’t worry, because in this article, we will guide you through the steps to fix your 2017 Dodge Charger door panel. Whether you are experiencing issues with the interior door handle, window controls, or any other component, we’ve got you covered. By following our detailed instructions, you’ll be able to restore your door panel to its former glory in no time.
Gather the Necessary Tools and Materials
Before you begin fixing your 2017 Dodge Charger door panel, it is important to have the right tools and materials on hand. Here’s what you’ll need:
- Flathead screwdriver
- Trim panel removal tool
- Torx screwdriver set
- Socket wrench set
- Replacement door panel clips or fasteners (if necessary)
- Replacement door panel (if necessary)
Make sure you have all these items readily available before you proceed with the repair.
Remove the Door Panel
To begin fixing your 2017 Dodge Charger door panel, you’ll first need to remove it. Follow these steps:
- Start by using a flathead screwdriver or a trim panel removal tool to gently pry off the window switch panel. Be careful not to damage the panel or the electrical connectors behind it. Disconnect the electrical connectors if necessary.
- Next, remove any screws or bolts that secure the door panel to the door frame. These may be located under the armrest, behind door handles, or in other hidden areas. Use a Torx screwdriver or a socket wrench, depending on the type of fasteners used.
- Once all the screws or bolts are removed, carefully pry off the door panel using a trim panel removal tool. Start from the bottom and work your way around the edges. Apply gentle pressure to release the plastic clips that hold the panel in place. Take your time to avoid breaking any clips or damaging the panel.
- Once the panel is loose, lift it up and away from the door frame. Be cautious of any remaining electrical connectors for components such as speakers or interior lights. Disconnect these connectors if necessary.
With the door panel removed, you can now proceed to address the specific issue you are facing.
Repair or Replace the Door Panel Components
Now that you have access to the interior of the door, you can inspect and repair or replace the necessary components. Here are some common issues you may encounter and how to fix them:
1. Interior Door Handle
If the interior door handle is loose or not functioning properly, follow these steps to fix it:
- Locate the screws or bolts that secure the interior door handle to the door frame. Use a screwdriver or socket wrench to tighten them if they are loose.
- If the handle itself is damaged, you may need to replace it. Remove any screws or bolts holding the handle in place and disconnect any electrical connectors if needed. Install the new handle by reversing the removal steps.
2. Window Controls
If the window controls on your door panel are malfunctioning, here’s what you can do:
- Check the electrical connections behind the window switch panel. Ensure that they are securely connected. If any connectors are loose, reconnect them properly.
- If the window switch panel itself is damaged, you may need to replace it. Follow the same steps as mentioned earlier for removing and replacing the panel.
- If the window motor or regulator is the issue, it may require a more complex repair. Consider seeking professional assistance or consulting the vehicle’s service manual for detailed instructions.
3. Panel Clips or Fasteners
In some cases, the plastic clips or fasteners that secure the door panel to the door frame may break or become loose. Here’s how to address this issue:
- Inspect the clips or fasteners and identify any broken or damaged ones. Remove them using a trim panel removal tool.
- Replace the broken clips or fasteners with new ones specifically designed for your 2017 Dodge Charger. Ensure they are securely fastened.
4. Damaged Door Panel
If your door panel is severely damaged or worn out, it may be necessary to replace it entirely. Here’s how:
- Find a replacement door panel that matches the color and design of your existing panel. You can check with your local Dodge dealership or search online for compatible options.
- Follow the steps mentioned earlier to remove the old door panel.
- Install the new door panel by reversing the removal steps. Make sure all electrical connectors are properly connected.
Reinstall the Door Panel
After you have successfully repaired or replaced the necessary components, it’s time to reinstall the door panel. Follow these steps:
- Reconnect any electrical connectors for components such as speakers or interior lights if they were disconnected during the repair process.
- Align the door panel with the door frame and gently press it in place. Make sure the plastic clips engage properly.
- If there are screws or bolts, reinstall them using the appropriate tool.
- Finally, snap the window switch panel back into position, ensuring all electrical connectors are securely connected.
Fixing the door panel of your 2017 Dodge Charger may seem like a daunting task, but with the right tools, materials, and guidance, it can be accomplished successfully. By following the steps outlined in this article, you can address common issues with the interior door handle, window controls, panel clips, or even replace the entire door panel if necessary. Remember to take your time, be careful with the delicate components, and seek professional assistance if needed. With a repaired or replaced door panel, your 2017 Dodge Charger will look and function as good as new.
Dodge Charger Door Panels v78
Frequently Asked Questions
How do I remove the door panel on my 2017 Dodge Charger?
To remove the door panel on your 2017 Dodge Charger, follow these steps:
- Start by carefully prying off the trim piece located behind the door handle using a trim removal tool.
- Next, remove the screws securing the armrest and any other visible screws on the panel.
- Gently pry around the edges of the door panel to release the retaining clips. Start from the bottom and work your way up.
- Once all the clips are released, lift the panel upwards to remove it from the door.
How do I repair a broken door handle on my 2017 Dodge Charger?
If you have a broken door handle on your 2017 Dodge Charger, you can replace it by following these steps:
- Begin by removing the door panel using the steps mentioned earlier.
- Locate the screws or bolts securing the broken handle to the door and remove them.
- Disconnect any electrical connectors if applicable.
- Replace the broken handle with a new one, ensuring it is securely attached.
- Reinstall the door panel by reversing the removal steps.
How do I fix a loose or rattling door panel on my 2017 Dodge Charger?
If you experience a loose or rattling door panel on your 2017 Dodge Charger, you can resolve the issue with these steps:
- First, remove the door panel by following the instructions provided earlier.
- Inspect the retaining clips and screws on the panel for any damage or looseness.
- If any clips or screws are damaged or loose, tighten or replace them accordingly.
- Ensure all the retaining clips are properly aligned with the door frame before reattaching the panel.
- Reinstall the door panel by reversing the removal steps.
Final Thoughts
To fix the 2017 Dodge Charger door panel, you can start by identifying the issue and gathering the necessary tools. Once you have removed the door panel, inspect it for any damages or loose components. Address any broken parts by replacing them with new ones. Ensure that all the electrical connections are secure and functioning properly. Finally, reattach the door panel carefully, making sure it aligns correctly with the door frame. By following these steps, you can successfully fix the 2017 Dodge Charger door panel and restore its functionality.
