Looking to change the battery on your relic watch? No worries, we’ve got you covered! In this article, we’ll walk you through the simple and straightforward process of changing the battery on your beloved timepiece. Whether you’re a watch enthusiast or just looking to save some money on a trip to the jeweler, learning how to change the battery on a relic watch is a useful skill to have. So, let’s dive right in and get your watch ticking again!
How to Change the Battery on a Relic Watch
Introduction
Relic watches are popular for their timeless designs and durability. However, like any other battery-powered watch, the time will come when you need to change the battery to keep it ticking accurately. While taking your watch to a professional is always an option, it’s also possible to change the battery yourself with some basic tools and a little know-how. In this guide, we will walk you through the step-by-step process of changing the battery on a relic watch, ensuring you can keep your timepiece running smoothly.
Gather the Necessary Tools
Before you begin, make sure you have the following tools at hand:
- Small screwdriver set (including flathead and Phillips heads)
- Watch case opener tool or a small, flat tool with a thin blade
- Non-magnetic tweezers
- New watch battery (check your watch’s manual or the old battery for the correct model)
- A clean, soft cloth or watch cleaning brush
Identify the Type of Case Back
Relic watches can have different types of case backs, and it’s important to identify which one your watch has before proceeding. The main types of case backs are:
- Screw-on case backs
- Pop-off case backs
- Pressure-fit case backs
To determine the type of case back on your Relic watch, examine the back of the watch carefully. Look for small slots or a series of screws that would indicate a screw-on case back. If there are no visible screws or slots, your watch likely has a pop-off or pressure-fit case back.
Removing a Screw-on Case Back
If your watch has a screw-on case back, follow these steps to remove it:
- Place the watch face down on a soft cloth or watch holder to protect the front.
- Use a small flathead screwdriver that fits the grooves of the screws and turn it counterclockwise to loosen each screw.
- Once the screws are loosened, carefully remove them and set them aside in a safe place.
- With the screws removed, use the watch case opener tool or a flat tool with a thin blade to carefully pry open the case back. Insert the blade into the small gap between the case back and the case, and gently twist to lift the case back off.
Removing a Pop-off Case Back
To remove a pop-off case back, follow these steps:
- Make sure the watch face is protected by placing it face down on a soft cloth or watch holder.
- Look for a small notch or groove on the side of the case back. This is the access point for removing the case back.
- Using a small flathead screwdriver, insert the blade into the notch or groove and gently twist to pop open the case back.
- Once the case back is released, carefully lift it off using your fingers or tweezers.
Removing a Pressure-fit Case Back
If your Relic watch has a pressure-fit case back, follow these steps to remove it:
- Ensure the watch face is protected by placing it face down on a soft cloth or watch holder.
- Use a non-magnetic tweezers or your fingers to grip the sides of the case back.
- Apply gentle, even pressure and rotate the case back counterclockwise to unscrew it.
- Continue turning until the case back is loose enough to lift off.
Removing the Old Battery
With the case back successfully removed, now it’s time to remove the old battery. Follow these steps:
- Use the non-magnetic tweezers to carefully lift the battery out of its compartment. Be cautious not to touch any other components inside the watch.
- If necessary, take note of the battery type and model number. This information can be helpful when shopping for a replacement battery.
- Dispose of the old battery safely and properly. Many electronic stores or watch repair shops have battery recycling programs.
Installing the New Battery
Now that you’ve removed the old battery, it’s time to install the new one. Follow these steps:
- Take the new battery and ensure it matches the type and model number of the old battery.
- Using the non-magnetic tweezers, carefully place the new battery into the battery compartment, ensuring the positive side faces up.
- Press gently on the battery to ensure it is secure and in the correct position.
Replacing the Case Back
With the new battery installed, it’s time to close up the watch and secure the case back. Follow these steps:
- Ensure the gasket or O-ring on the case back is clean and properly seated. This helps maintain the watch’s water resistance.
- Place the case back onto the watch, aligning it properly with the case.
- For screw-on case backs, insert the screws back into their respective positions and tighten them clockwise using a screwdriver.
- For pop-off or pressure-fit case backs, simply press down on the case back until you hear a click, indicating it has locked into place.
Final Checks and Testing
After replacing the case back, it’s important to perform a few final checks and tests to ensure everything is functioning correctly:
- Double-check that the watch is running and displaying the correct time.
- Inspect the watch for any signs of water damage or moisture intrusion. If you notice any, consult a professional watchmaker.
- Gently wipe the watch with a clean, soft cloth to remove any fingerprints or smudges.
Changing the battery on a Relic watch is a straightforward process when you have the right tools and follow the proper steps. By following this guide, you can confidently replace the battery in your relic watch without needing to rely on a professional. Remember to always exercise caution, take your time, and if you encounter any difficulties or uncertainties, it’s best to seek assistance from a trained watchmaker. With a fresh battery, your Relic watch will continue to keep you punctual and stylish for years to come.
Frequently Asked Questions
How do I change the battery on my Relic watch?
Changing the battery on a Relic watch is a relatively simple process that can be done at home. Here’s how to do it:
What tools do I need to change the battery on a Relic watch?
To change the battery on a Relic watch, you will need the following tools:
- Small Phillips screwdriver
- Case knife or blade
- Pair of tweezers
- New battery (check the Relic website or your watch manual for the correct battery type)
How do I open the back of the Relic watch?
To open the back of the Relic watch, follow these steps:
- Locate the small slot or notch on the back of the watch case.
- Insert the blade of the case knife or use a flathead screwdriver into the slot and gently pry open the back cover.
- Be careful not to scratch the watch case or damage the gasket, if present.
How do I remove the old battery from my Relic watch?
Once the back cover is removed, use the tweezers to carefully lift out the old battery from its compartment.
How do I insert the new battery into my Relic watch?
To insert the new battery into your Relic watch, follow these steps:
- Ensure the new battery is the correct type and size for your specific Relic watch model.
- Using the tweezers, place the new battery into the compartment with the positive side facing up.
- Press down gently on the battery to ensure it is properly seated in the compartment.
How do I close the back cover of my Relic watch?
After inserting the new battery, align the back cover with the watch case and press down firmly until it clicks into place.
Make sure the back cover is securely closed to maintain water resistance, if applicable. If you encounter any resistance or difficulty closing the back, double-check to ensure the battery is properly positioned and try again.
Final Thoughts
Changing the battery on a relic watch is a simple process that can be done at home. Start by carefully removing the back cover of the watch using a small screwdriver or a case opener tool. Take note of the battery type and remove the old battery using tweezers. Insert the new battery, making sure it is placed correctly with the positive and negative sides facing the right direction. Replace the back cover and use the tool to secure it back in place. With these steps, you can easily change the battery on a relic watch and keep it ticking accurately and reliably.