Looking to change the battery in your Subaru key fob? We’ve got you covered! In this article, we’ll walk you through a simple step-by-step guide on how to change the battery in your Subaru key fob. No need to worry about searching for the answer elsewhere, as we’ve got all the information you need right here. So, let’s dive in and learn exactly how to change the battery in your Subaru key fob.

How to Change the Battery in My Subaru Key Fob

Introduction

Having a functioning key fob is essential for unlocking and starting your Subaru vehicle with ease. Over time, the battery in your Subaru key fob may lose its power, resulting in reduced performance. If you notice that your key fob is not responding as it should, it may be time to replace the battery. In this guide, we will walk you through the step-by-step process of changing the battery in your Subaru key fob, ensuring that you can continue to enjoy the convenience and security it provides.

Step 1: Gather the Necessary Tools

Before you begin, make sure you have the following tools handy:

• Small flathead screwdriver
• New battery (check your key fob’s manual or the existing battery for the correct type)

Step 2: Prepare a Safe Work Area

To avoid losing any small parts or damaging your key fob during the battery replacement process, it is important to prepare a safe work area. Find a clean, well-lit space where you can comfortably work without distractions. Consider placing a soft cloth or towel on the surface to protect your key fob from scratches.

Step 3: Identify the Battery Compartment

Locate the battery compartment on your Subaru key fob. Depending on the model, the compartment may be on the back or front of the key fob. Look for a small indentation or groove where you can insert the screwdriver to pry open the compartment.

Pro Tip:

If you are unsure about the exact location of the battery compartment, refer to your Subaru vehicle’s user manual or consult the manufacturer’s website for detailed instructions specific to your model.

Step 4: Open the Battery Compartment

Using the small flathead screwdriver, gently insert it into the designated groove or indentation. Apply a slight amount of pressure to pry open the battery compartment. Be careful not to use excessive force, as this could damage the key fob.

Step 5: Remove the Old Battery

Once the battery compartment is open, you will see the old battery. Carefully remove the old battery from its housing, taking note of its orientation. Observe how the positive (+) and negative (-) sides of the battery are positioned.

Step 6: Insert the New Battery

Take the new battery and align it properly in the compartment, ensuring that the positive (+) and negative (-) sides are facing the correct way. Press the battery firmly into place, making sure it is secure and properly seated.

Step 7: Close the Battery Compartment

After inserting the new battery, gently close the battery compartment by applying light pressure. You should hear a click or feel the compartment snap back into place. Ensure that the battery compartment is securely closed to prevent any water or debris from entering.

Step 8: Test the Key Fob

Now that you have successfully changed the battery, it is time to test the functionality of your Subaru key fob. Stand near your vehicle and press the buttons on the key fob to verify that it is working properly. If the key fob does not function as expected, double-check the battery orientation or consider replacing the battery again with a new one.

Tips and Precautions

While changing the battery in your Subaru key fob is a relatively simple task, it is important to keep the following tips and precautions in mind:

• Always use the correct type of battery recommended for your specific Subaru key fob. Using an incompatible battery may cause damage or result in poor performance.
• Handle the battery with care and avoid touching the battery terminals with your bare hands. Oils and moisture from your skin can affect the battery’s performance.
• Dispose of the old battery properly. Many electronic stores or recycling centers accept used batteries for safe disposal.
• If you encounter any difficulties or have concerns about changing the battery yourself, it is recommended to consult a professional or visit your nearest Subaru dealership for assistance.

Changing the battery in your Subaru key fob is a simple process that can be done at home with the right tools and precautions. By following the step-by-step instructions outlined in this guide, you can ensure that your key fob continues to operate smoothly, providing you with the convenience and peace of mind you deserve. Remember to always use the correct battery type, handle the battery with care, and test the functionality of the key fob after replacement. With a new battery, you can confidently unlock and start your Subaru vehicle hassle-free.

Frequently Asked Questions

How do I change the battery in my Subaru key fob?

To change the battery in your Subaru key fob, follow the steps below:

What type of battery does my Subaru key fob use?

Most Subaru key fobs use a CR2032 lithium coin cell battery. However, it is always recommended to check your vehicle’s owner’s manual for the correct battery type.

Where is the battery located in my Subaru key fob?

The battery in your Subaru key fob is typically located on the back cover. Look for a small compartment or slot that can be opened.

How do I open the Subaru key fob to access the battery?

To open the Subaru key fob, you may need a small flathead screwdriver or a coin. Insert the screwdriver or coin into the notch or slot on the side of the key fob, then twist or pry gently to separate the two halves of the fob.

How do I replace the battery in my Subaru key fob?

Once you have opened the key fob, locate the battery. Carefully remove the old battery and replace it with a new one, making sure to align the positive (+) and negative (-) ends correctly. Then, reassemble the key fob by aligning the two halves and pressing them together firmly.

Do I need to reprogram my Subaru key fob after replacing the battery?

In most cases, you do not need to reprogram your Subaru key fob after changing the battery. The key fob should automatically reconnect with your vehicle’s security system. However, if you experience any issues with the key fob functionality after battery replacement, consulting the owner’s manual or contacting a Subaru dealership for assistance is recommended.

Final Thoughts

To change the battery in your Subaru key fob, follow these simple steps. First, locate the small indentation on the side of the key fob. Insert a small flathead screwdriver or a coin into the indentation and twist gently to separate the key fob’s halves. Once opened, carefully remove the old battery and replace it with a new one, making sure the positive side is facing up. Finally, snap the key fob’s halves back together until they are securely in place. Changing the battery in your Subaru key fob is a straightforward process that ensures your key fob continues to function properly.