Looking to change the key fob battery for your Subaru Crosstrek? You’ve come to the right place! In this article, we’ll walk you through the simple steps of how to change the key fob battery for your Subaru Crosstrek. No need to worry, we’ve got you covered! So, let’s dive right in and learn how to change the key fob battery for your Subaru Crosstrek. It’s easier than you might think!

How to Change Key Fob Battery for Subaru Crosstrek

Changing the key fob battery for your Subaru Crosstrek is a simple and straightforward process. By following a few easy steps, you can replace the battery and ensure your key fob continues to work properly. In this guide, we will walk you through the process, providing detailed instructions and helpful tips along the way.

Step 1: Gather the necessary tools and a replacement battery

Before starting, make sure you have the following items on hand:

• A small flathead screwdriver
• A replacement battery (check your Subaru Crosstrek’s owner’s manual for the appropriate battery size)

Having these tools and the replacement battery readily available will save you time during the process.

Step 2: Locate the battery compartment on your key fob

To access the battery, examine your Subaru Crosstrek’s key fob. Look for a small slot or indentation on the side. This is where the battery compartment is located.

TIP:

If you’re having trouble finding the battery compartment, refer to your Subaru Crosstrek’s owner’s manual for a diagram or step-by-step instructions.

Step 3: Open the battery compartment

Using the small flathead screwdriver, gently pry open the battery compartment. Be careful not to apply too much pressure to avoid damaging the key fob. The battery compartment should easily separate from the key fob when done correctly.

TIP:

If you’re having trouble opening the battery compartment, try using your fingernail or another small, thin object to gently pry it open. Take your time to avoid any accidental damage.

Step 4: Remove the old battery

Once the battery compartment is open, carefully remove the old battery. Pay attention to its orientation, noting which side is facing up.

TIP:

To make it easier to remove the old battery, use the small flathead screwdriver to gently lift it out. Be cautious not to damage the contacts inside the battery compartment.

Step 5: Insert the new battery

Take your new battery and align it correctly inside the battery compartment. Make sure it matches the orientation of the old battery. Gently press it down until it is securely in place.

TIP:

If the battery doesn’t fit snugly, double-check its orientation. Reversing the battery might cause it to not fit properly.

Step 6: Close the battery compartment

After inserting the new battery, close the battery compartment by aligning the edges and pressing them together. You should hear a click or feel the compartment securely snap back into place.

Step 7: Test the key fob

Now that you have replaced the battery, it’s time to check if your key fob is working correctly. Press any button on the key fob, and if the battery replacement was successful, the buttons should respond immediately.

TIP:

Sometimes, after replacing the battery, the key fob might require reprogramming to sync with your Subaru Crosstrek. Refer to your owner’s manual for instructions on how to reprogram the key fob if needed.

Step 8: Dispose of the old battery properly

Safely dispose of the old battery by recycling it at a designated battery recycling center. Do not throw it in the regular trash as batteries contain harmful chemicals that can harm the environment.

TIP:

If you’re unsure where to recycle the old battery, check with your local recycling facility or contact your Subaru dealership for guidance.

Additional Tips and Recommendations

To ensure a smooth battery replacement process for your Subaru Crosstrek key fob, consider the following tips:

• Always use the correct battery size as specified in your Subaru Crosstrek’s owner’s manual. Using the wrong battery can lead to key fob malfunctions or result in damage to the key fob itself.
• If your key fob stops working even after replacing the battery, double-check the battery’s orientation and ensure it is securely in place. If the issue persists, consult your Subaru dealership for further assistance.
• Regularly inspect your key fob for signs of wear or damage. If you notice any cracks, corrosion, or other issues, it might be time to replace the key fob altogether.
• Consider purchasing a spare key fob and keeping it in a safe place. This will come in handy if you lose or damage your primary key fob, allowing you to easily replace it without any inconvenience.

With these detailed instructions and helpful tips, you now have the knowledge and confidence to change the key fob battery for your Subaru Crosstrek. Remember to always refer to your owner’s manual for specific guidance and further information. By properly maintaining your key fob, you can ensure it remains functional and reliable, providing you with convenient access to your Subaru Crosstrek.

Frequently Asked Questions

How do I change the key fob battery in my Subaru Crosstrek?

To change the key fob battery in your Subaru Crosstrek, follow these steps:

What type of battery does the Subaru Crosstrek key fob use?

The Subaru Crosstrek key fob uses a CR2032 3V lithium coin cell battery.

Where can I purchase a replacement battery for my Subaru Crosstrek key fob?

You can purchase a replacement CR2032 3V lithium coin cell battery for your Subaru Crosstrek key fob at most electronics stores, automotive supply stores, or online retailers.

How do I open the Subaru Crosstrek key fob to replace the battery?

To open the Subaru Crosstrek key fob, locate the small slot on the side of the fob and use a flathead screwdriver or a coin to pry it open. Gently twist the screwdriver or coin to separate the two halves of the fob.

How do I replace the battery in the Subaru Crosstrek key fob?

Once the Subaru Crosstrek key fob is open, carefully remove the old battery. Insert the new CR2032 3V lithium coin cell battery, ensuring the positive (+) side is facing up. Then, snap the two halves of the key fob back together.

Do I need to reprogram my key fob after changing the battery in my Subaru Crosstrek?

No, you should not need to reprogram your key fob after changing the battery in your Subaru Crosstrek. The new battery should power the key fob and allow it to function as usual.

Final Thoughts

To change the key fob battery in your Subaru Crosstrek, follow these simple steps. First, locate the small indentation on the key fob and use a small flathead screwdriver or a coin to pry it open. Once open, carefully remove the old battery and replace it with a new one, making sure the positive (+) side is facing up. Then, snap the key fob back together, ensuring it is securely closed. With these easy steps, you can quickly and easily change the key fob battery in your Subaru Crosstrek.