Looking to change the battery in your Subaru fob? We’ve got you covered! Don’t worry, it’s a simple process that you can easily do yourself. In this article, we’ll walk you through the step-by-step instructions on how to change the battery in your Subaru fob. So, if you’re ready to get your fob working like new again, let’s dive right in and learn how to change the battery in your Subaru fob.
How to Change the Battery in a Subaru Fob
Introduction
The Subaru key fob is a convenient and essential tool for operating your Subaru vehicle. However, like any electronic device, the battery in your Subaru fob will eventually need to be replaced. In this guide, we will provide you with step-by-step instructions on how to change the battery in your Subaru fob, ensuring that you can continue to use it without any interruption.
Step 1: Gather the Required Tools
Before you begin, make sure you have the following tools and materials ready:
- A new CR2032 lithium coin battery
- A small flathead screwdriver or a coin
Step 2: Locate the Battery Compartment
To replace the battery in your Subaru fob, you need to locate the battery compartment. The location may vary depending on the Subaru model and year, but it is typically found on the back of the fob. Look for a small indentation or groove on the side of the fob, which you can use to separate the two halves.
Step 3: Open the Fob
Using your small flathead screwdriver or a coin, insert it into the groove or indentation and gently twist or pry to separate the two halves of the fob. Be careful not to apply too much force to avoid damaging the fob or injuring yourself. Once the fob is open, set the two halves aside.
Step 4: Remove the Old Battery
Inside the fob, you will see the small battery compartment. Carefully remove the old battery by pushing it out from the side or using the screwdriver to pop it out. Take note of the battery’s orientation, ensuring you replace the new battery correctly.
Step 5: Insert the New Battery
Take the new CR2032 battery and insert it into the battery compartment. Make sure the positive (+) side of the battery is facing up, following the markings inside the fob. Press the battery down gently until it is securely in place.
Step 6: Reassemble the Fob
Place the two halves of the fob back together, aligning them properly. Press them together firmly until you hear a click, indicating that they are securely joined. Take a moment to ensure that the fob is fully closed and there are no gaps between the halves.
Step 7: Test the Fob
After replacing the battery and reassembling the fob, it’s crucial to test if it is functioning correctly. Stand near your Subaru vehicle and press the buttons on the fob to lock and unlock the doors. Check if the buttons respond appropriately, indicating that the battery replacement was successful.
Tips and Precautions
To ensure a smooth battery replacement process and avoid any issues, keep the following tips and precautions in mind:
- Use a CR2032 lithium coin battery with the correct voltage to ensure compatibility.
- Handle the battery with clean, dry hands to prevent any contamination or moisture damage.
- Do not touch the battery contacts or expose them to dirt or moisture as it may interfere with proper functioning.
- Dispose of the old battery responsibly according to local regulations and recycling guidelines.
- If you encounter any difficulties or are unsure about the process, consult your vehicle’s owner’s manual or contact a Subaru dealership for assistance.
Changing the battery in your Subaru fob is a simple and straightforward process. By following the steps outlined in this guide, you can quickly replace the battery and ensure that your fob continues to operate efficiently. Regularly checking and replacing the battery when needed will help you avoid any inconvenience or unexpected issues with your Subaru key fob. Keep your fob in good working condition, and enjoy the convenience it provides in accessing and operating your Subaru vehicle.
Frequently Asked Questions
How do I change the battery in my Subaru fob?
To change the battery in your Subaru fob, follow these steps:
What type of battery is used in a Subaru fob?
A Subaru fob typically uses a CR2032 lithium coin cell battery. It is a common battery type that can be easily found at most stores.
Can I change the battery in my Subaru fob myself?
Yes, you can change the battery in your Subaru fob yourself. It is a simple process that requires minimal tools and can be done in a few minutes.
What tools do I need to change the battery in my Subaru fob?
To change the battery in your Subaru fob, you will need a small flathead screwdriver or a coin to open the fob, and a new CR2032 battery to replace the old one.
How do I open the Subaru fob to access the battery?
To open the Subaru fob, locate the small slot on the side or the back of the fob. Insert a small flathead screwdriver or a coin into the slot and twist gently to pop the fob open.
What do I do if changing the battery in my Subaru fob doesn’t solve the issue?
If changing the battery in your Subaru fob does not resolve any issues you are experiencing, it is recommended to contact your local dealership or an automotive locksmith for further assistance.
Final Thoughts
To change the battery in your Subaru fob, follow these simple steps. First, locate the small slot on the back of the fob. Insert a small flathead screwdriver or a coin into the slot and gently pry it open. Inside, you will see the old battery. Carefully remove it and replace it with a new CR2032 battery, making sure it is properly aligned. Close the fob by pressing the halves together until they click into place. That’s it! Now you know how to change the battery in your Subaru fob. It’s a quick and easy process that will keep your fob working efficiently.