Have you ever found yourself in a frustrating situation when your Subaru Crosstrek key fob suddenly stops working? Don’t worry, we’ve got you covered with a simple solution – how to change the battery in your Subaru Crosstrek key fob! This quick and easy fix will have your key fob back to functioning in no time. So, if you’re ready to get your key fob back in action, let’s dive right into the step-by-step process of how to change the battery in your Subaru Crosstrek key fob.
How to Change the Battery in a Subaru Crosstrek Key Fob
Introduction
The key fob is an essential component of your Subaru Crosstrek that allows you to remotely lock and unlock your vehicle, as well as activate the panic alarm. Similar to any other electronic device, the key fob requires a power source, in this case, a small battery. Over time, the battery will start to drain, and you may notice a decrease in the key fob’s functionality. Fortunately, changing the battery in your Subaru Crosstrek key fob is a straightforward process. In this article, we will guide you through the steps to replace the key fob battery and ensure your key fob works like new.
Gather the Necessary Tools
Before you begin, gather the following tools:
- Replacement battery: CR2032 lithium coin cell battery
- Small flathead screwdriver or a coin with a flat edge
Step-by-Step Instructions
Step 1: Locate the Battery Compartment
The battery compartment is present on the back of your Subaru Crosstrek key fob. To access it, follow these steps:
- Hold the key fob with the buttons facing down.
- Locate the seam along the edge of the key fob.
- Insert your fingernail or a small flathead screwdriver into the seam.
- Gently pry open the key fob to expose the battery compartment.
Note: Be careful not to apply too much force while prying open the key fob to avoid damaging it.
Step 2: Remove the Old Battery
After accessing the battery compartment, you need to remove the old battery. Follow these steps to do so:
- Identify the position and orientation of the old battery.
- Use your fingers or a small flathead screwdriver to carefully lift the old battery out of its slot.
Note: Take note of the battery’s position and orientation as you will need to insert the new battery in the same way.
Step 3: Insert the New Battery
Now that you have removed the old battery, it’s time to insert the new one:
- Take the new CR2032 battery and ensure it matches the position and orientation of the old battery.
- Gently place the new battery into the battery slot, ensuring it is securely seated.
Note: Ensure the battery is properly inserted, with the positive (+) side facing up.
Step 4: Reassemble the Key Fob
After inserting the new battery, it’s time to reassemble the key fob:
- Align the two halves of the key fob.
- Apply gentle pressure to snap the key fob back together.
- Ensure all edges are aligned and the key fob is securely closed.
Testing the Key Fob
Now that you have successfully changed the battery in your Subaru Crosstrek key fob, it’s important to test its functionality. Follow these steps to test your key fob:
- Stand near your Subaru Crosstrek and ensure you are within range.
- Press the lock or unlock button on the key fob.
- Observe whether the vehicle locks or unlocks in response.
- Press the panic button to ensure it activates the alarm.
If the key fob works correctly, then congratulations! You have successfully changed the battery and restored the functionality of your Subaru Crosstrek key fob.
Changing the battery in your Subaru Crosstrek key fob is a simple process that can be done at home with just a few tools. By following the step-by-step instructions outlined in this article, you can ensure that your key fob continues to operate smoothly and reliably. Remember to replace the battery with a CR2032 lithium coin cell and test the key fob’s functionality after the replacement. With a properly functioning key fob, you can enjoy the convenience and security that it provides each time you use your Subaru Crosstrek.
Frequently Asked Questions
How do I change the battery in my Subaru Crosstrek key fob?
To change the battery in your Subaru Crosstrek key fob, please follow these steps:
What type of battery does the Subaru Crosstrek key fob use?
The Subaru Crosstrek key fob uses a CR1620 lithium coin battery.
Where is the battery located in the Subaru Crosstrek key fob?
The battery is located on the back cover of the Subaru Crosstrek key fob. It can be accessed by removing the small screw on the back.
How do I remove the back cover of the Subaru Crosstrek key fob?
To remove the back cover, you will need a small screwdriver. Use the screwdriver to unscrew the small screw on the back of the key fob. Once the screw is removed, you can gently pry open the back cover using the screwdriver or your fingernail.
How do I replace the battery in the Subaru Crosstrek key fob?
After opening the back cover, take out the old battery and insert a new CR1620 lithium coin battery. Make sure the positive side of the battery is facing up. Then, close the back cover and tighten the screw securely.
Do I need to reprogram the Subaru Crosstrek key fob after changing the battery?
No, you do not need to reprogram the key fob after changing the battery. Simply replace the battery following the steps mentioned above, and your key fob should continue to function as normal.
Final Thoughts
To change the battery in your Subaru Crosstrek key fob, follow these simple steps. First, locate the small notch on the side of the fob and use a small screwdriver or coin to pry it open. Next, carefully remove the old battery and replace it with a new one, ensuring it is properly aligned. Then, snap the key fob back together and test it to ensure it is working properly. By following these instructions, you can easily change the battery in your Subaru Crosstrek key fob and continue using it hassle-free. Don’t forget to refer to the user manual for any specific instructions.