Looking to change the battery in your Mitsubishi key fob? No worries, we’ve got you covered! In this article, we’ll guide you through the simple and straightforward process of replacing the battery in your Mitsubishi key fob. It’s a quick and easy fix that will have your key fob functioning like new in no time. So, if you’re eager to learn how to change the battery in your Mitsubishi key fob, keep reading! We’ve got all the information you need right here. Let’s dive in!

How To Change Battery In Mitsubishi Key Fob

Having a reliable key fob is essential for modern car owners. It allows convenient access to your vehicle with just the press of a button. However, over time, the battery in your Mitsubishi key fob may die, leading to a loss of functionality. In this guide, we will walk you through the step-by-step process of changing the battery in your Mitsubishi key fob, ensuring you can continue to use it without any issues.

What You Will Need

Before you begin, it’s important to gather all the necessary tools and materials. Here’s what you’ll need:

• New battery (check your key fob’s manual for the specific battery type)
• Small flat-head screwdriver or a plastic pry tool
• Clean cloth or tissue

Step 1: Prepare Your Work Area

Before you start replacing the battery, it’s important to ensure you have a clean and organized work area. This will help prevent any small parts from getting lost during the process. Find a well-lit and flat surface to work on.

Step 2: Open the Key Fob

The next step is to open the key fob to access the battery compartment. Follow these steps:

1. Locate the small indentation or slot on the side of the key fob. This is usually located near the keyring attachment.
2. Insert the small flat-head screwdriver or plastic pry tool into the slot.
3. Gently twist or pry the screwdriver or tool to separate the two halves of the key fob. Be careful not to apply too much pressure to avoid damaging the key fob.
4. Once the key fob is open, carefully set aside the top half, exposing the battery compartment.

Some key fobs may have a different opening mechanism, so if you’re unsure, consult your key fob’s manual or contact your local Mitsubishi dealership for guidance.

Step 3: Remove the Old Battery

Now that you have access to the battery compartment, it’s time to remove the old battery. Follow these steps:

1. Identify the battery within the key fob. It’s usually a small, round disk located in a designated slot.
2. Using your finger or a small flat-head screwdriver, gently push the battery out of its slot. Be cautious not to damage the surrounding components.
3. Once the old battery is removed, set it aside for proper disposal later.

Step 4: Insert the New Battery

With the old battery out, it’s time to insert the new one. Follow these steps:

1. Take the new battery and check its orientation. Most key fobs have markings indicating which side should face up.
2. Align the new battery with the designated slot in the key fob.
3. Press the battery gently but firmly into place. Ensure it is securely seated within the slot.

Step 5: Reassemble the Key Fob

Now that the new battery is in place, it’s time to put the key fob back together. Follow these steps:

1. Take the top half of the key fob and align it with the bottom half, ensuring the buttons and components fit together correctly.
2. Press the two halves together firmly until they snap into place.
3. Give the key fob a gentle shake to ensure it is securely closed.

Step 6: Test the Key Fob

Once the key fob is reassembled, it’s important to test its functionality. Follow these steps:

1. Stand near your Mitsubishi vehicle.
2. Press any button on the key fob to check if it sends a signal to the car.
3. If the key fob is working properly, the car should respond by locking, unlocking, or triggering any programmed actions.

If the key fob doesn’t work after replacing the battery, double-check the battery orientation and ensure it is properly seated. If the issue persists, it may be necessary to consult a professional or contact your local Mitsubishi dealership for further assistance.

Changing the battery in your Mitsubishi key fob is a relatively simple process that can save you time and money. By following these steps, you can ensure your key fob remains functional, allowing for convenient and secure access to your vehicle.

Frequently Asked Questions

How do I change the battery in my Mitsubishi key fob?

To change the battery in your Mitsubishi key fob, follow these steps:

What type of battery does a Mitsubishi key fob use?

A Mitsubishi key fob typically uses a CR2032 3-volt lithium battery. However, it is always recommended to check your vehicle’s owner’s manual for the specific battery type required.

How do I open the Mitsubishi key fob to access the battery?

To open the Mitsubishi key fob and access the battery, you will need a small flathead screwdriver or a similar tool. Look for a small notch on the side of the key fob and gently pry open the two halves of the fob using the tool.

Can I replace the Mitsubishi key fob battery myself?

Yes, replacing the battery in your Mitsubishi key fob is a simple procedure that can be done by yourself. Just make sure to handle the battery with care and follow the recommended steps to avoid any damage to the key fob.

Where can I purchase a replacement battery for my Mitsubishi key fob?

You can purchase a replacement battery for your Mitsubishi key fob at most electronic stores, automotive parts stores, or online retailers. It is important to ensure that you buy the correct battery type specified for your key fob model.

How often should I replace the battery in my Mitsubishi key fob?

The frequency of battery replacement in your Mitsubishi key fob may vary depending on usage. However, it is generally recommended to replace the battery every 1-2 years to ensure optimal performance and avoid any potential issues.

Final Thoughts

Changing the battery in your Mitsubishi key fob is a simple task that can be done in a few minutes. To begin, locate the small opening on the back of the key fob. Insert a thin object, such as a screwdriver or a coin, and gently twist to open the fob. Once open, carefully remove the old battery and replace it with a new one, ensuring that the positive (+) side is facing up. Finally, close the fob by aligning the two halves and pressing them together until they click into place. By following these steps, you can easily change the battery in your Mitsubishi key fob and continue using it without any issues. How To Change Battery In Mitsubishi Key Fob.