Are you wondering how to change the battery in your Hyundai Tiburon key fob? Well, fret not! In this article, we will walk you through the simple steps to get your key fob back to full functionality. No need to worry about complicated procedures or expert knowledge – we’ve got you covered. So, if your key fob is showing signs of a dying battery, stick around and we’ll show you exactly how to change it. Ready? Let’s dive in and learn how to change the battery in your Hyundai Tiburon key fob effortlessly.

How To Change Battery In Hyundai Tiburon Key Fob

The key fob for your Hyundai Tiburon is a convenient device that allows you to lock and unlock your car with ease. However, like any battery-powered device, the battery in the key fob will eventually run out of power. When this happens, it’s important to know how to change the battery to ensure that you can continue to use your key fob without any interruption. In this article, we will guide you through the process of changing the battery in your Hyundai Tiburon key fob, step by step.

Gather the necessary tools and materials

Before you start the battery replacement process, it’s important to gather all the necessary tools and materials. Here’s what you’ll need:

– A small flathead screwdriver or a coin
– A new CR2032 battery (or the battery type specified by your key fob’s manufacturer)
– A clean cloth or a cotton swab (optional)

Step 1: Locate the slot for the key blade

Begin by locating the slot on your Hyundai Tiburon key fob that allows you to access the key blade. The slot is usually located on the side or the bottom of the key fob. It may be marked with a small arrow or a picture of a key.

Step 2: Insert the screwdriver or coin into the slot

Once you’ve located the slot, insert the small flathead screwdriver or a coin into the slot. Apply gentle pressure and twist the screwdriver or coin to pry open the key fob. Be careful not to use excessive force to avoid damaging the key fob or injuring yourself.

Step 3: Separate the two halves of the key fob

After successfully opening the key fob, you will see two halves held together by small clips or tabs. Carefully separate the two halves by lifting the top half away from the bottom half. Take your time to ensure that you don’t accidentally break any of the clips or tabs.

Step 4: Remove the old battery

Once the key fob is open, you will see the battery compartment. It is usually a small round compartment with a circular metal cover. Remove the battery cover by gently prying it open with your fingers or using the screwdriver.

Next, carefully remove the old battery from its compartment. Take note of the battery’s orientation and make sure to remember which side is facing up. It’s a good idea to use a clean cloth or a cotton swab to clean the battery compartment before inserting the new battery.

Step 5: Insert the new battery

Now it’s time to insert the new battery into the key fob. Take the new battery and align it with the battery compartment, making sure the positive side (+) is facing up. Gently press the battery into the compartment until it fits snugly.

Step 6: Reassemble the key fob

After inserting the new battery, it’s time to put the key fob back together. Align the two halves of the key fob and carefully press them together. Make sure all the clips and tabs are securely fastened. You may need to apply slight pressure to snap the two halves back into place.

Step 7: Test the key fob

With the key fob reassembled, it’s time to test if the new battery is working properly. Press any button on the key fob to check if it successfully locks or unlocks your car. If the key fob is working as expected, you’ve successfully changed the battery. If not, double-check the battery orientation and reassemble the key fob if necessary.

Tips and precautions

– It’s always a good idea to use a small flathead screwdriver or a coin that is suitable for the slot to avoid damaging the key fob.
– Make sure to use the correct battery type specified by your key fob’s manufacturer. Using the wrong battery can lead to malfunction or damage.
– If you accidentally touch the battery with your bare hands, clean it with a cloth or a cotton swab before inserting it into the key fob to remove any oils or dirt.
– If you’re unsure about any step of the process, refer to your vehicle’s owner manual for specific instructions.

Changing the battery in your Hyundai Tiburon key fob is a simple task that can be done in just a few minutes. With the right tools and a new battery, you can easily keep your key fob working efficiently. Now that you know how to change the battery in your Hyundai Tiburon key fob, you can confidently tackle this task whenever the battery needs replacement.

Frequently Asked Questions

How do I change the battery in my Hyundai Tiburon key fob?

To change the battery in your Hyundai Tiburon key fob, follow these steps:

What type of battery does the Hyundai Tiburon key fob use?

The Hyundai Tiburon key fob typically uses a CR2032 coin cell battery.

Where can I purchase a replacement battery for my Hyundai Tiburon key fob?

You can purchase a replacement battery for your Hyundai Tiburon key fob at most electronics stores, automotive parts stores, or online retailers.

How do I open the Hyundai Tiburon key fob to access the battery?

To open the Hyundai Tiburon key fob, you will need a small flathead screwdriver or a prying tool. Carefully insert the tool into the seam of the key fob and gently pry it open. Be careful not to apply too much force to avoid damaging the key fob.

What should I do if my Hyundai Tiburon key fob still doesn’t work after changing the battery?

If your Hyundai Tiburon key fob does not work even after changing the battery, you may need to reprogram the key fob. Consult your vehicle’s owner’s manual or contact a Hyundai dealership for instructions on how to reprogram the key fob.

Are there any precautions I should take when changing the battery in my Hyundai Tiburon key fob?

When changing the battery in your Hyundai Tiburon key fob, it is important to handle the battery with care and avoid touching the electrical contacts. Make sure to insert the new battery with the correct polarity, matching the positive (+) and negative (-) symbols.

Final Thoughts

Replacing the battery in your Hyundai Tiburon Key Fob is a simple and straightforward process. To change the battery, start by using a small flathead screwdriver to pry open the key fob. Once the fob is open, carefully remove the old battery and replace it with a new one. Make sure to place the battery in the correct orientation. Close the key fob by snapping it back together and test it to ensure it is working properly. Follow these steps to successfully change the battery in your Hyundai Tiburon Key Fob and ensure the continued functionality of your key fob. How To Change Battery In Hyundai Tiburon Key Fob.