Looking to change the battery in your Ford key fob for the year 2020? We’ve got you covered! In this article, we’ll walk you through the simple steps to replace the battery in your Ford key fob, ensuring that you can continue to use it without any interruptions. Whether you’re a seasoned car owner or a newbie, our easy-to-follow instructions will provide you with the guidance you need. So, if you’re wondering how to change the battery in your Ford key fob 2020, keep reading!

How to Change the Battery in a Ford Key Fob 2020

Introduction

The key fob is a handy device that allows you to conveniently lock, unlock, and start your Ford vehicle with just a push of a button. However, like any other electronic device, the key fob requires a power source to function properly. Over time, the battery in your Ford key fob will lose its charge and need to be replaced. In this article, we will guide you step-by-step on how to change the battery in a Ford key fob for the year 2020. By following these instructions, you can ensure that your key fob continues to operate smoothly and reliably.

Step 1: Identify the Key Fob Type

Before you start the battery replacement process, it is crucial to identify the type of key fob you have. Ford uses different key fob designs, and each may have a slightly different method for battery replacement. In general, Ford vehicles for the year 2020 may have key fobs with either a removable key or a keyless entry system.

If your key fob has a removable key:

– Look for a small button or latch on the side of the key fob.
– Press the button or slide the latch to release the physical key from the key fob.
– Once the key is removed, you will be able to access the battery compartment.

If your key fob is keyless:

– Examine the key fob for a small slot or indentation.
– Use a small flat-head screwdriver or a coin to gently pry open the key fob.

Step 2: Open the Key Fob

Once you have identified the type of key fob you have, it’s time to open it up and access the battery compartment. Follow the instructions below based on your key fob type:

If your key fob has a removable key:

– Hold the key fob with the buttons facing down and the key slot facing up.
– Insert a small flat-head screwdriver or a coin into the slot located on the side of the key fob.
– Gently twist the screwdriver or coin to separate the two halves of the key fob.

If your key fob is keyless:

– Locate the slot or indentation on the key fob.
– Insert a small flat-head screwdriver or a coin into the slot or indentation.
– Apply gentle pressure to pry open the key fob. Be careful not to apply too much force to avoid damaging the key fob.

Step 3: Replace the Battery

Now that you have successfully opened the key fob, you can proceed to replace the battery. Follow these steps:

Identify the battery type:

– Look for a small round battery located inside the key fob.
– Note down the type and size of the battery. Typically, Ford key fobs use CR2032 or CR2025 batteries.

Remove the old battery:

– Use a small flat-head screwdriver or a non-metallic tool to carefully pry out the old battery.
– Pay attention to the positive (+) and negative (-) markings on the battery. Ensure you insert the new battery with the correct orientation.

Insert the new battery:

– Take a new battery of the same type and size.
– Align the positive (+) and negative (-) markings on the battery with the corresponding markings inside the battery compartment.
– Gently press the battery into place until it fits securely.

Step 4: Close the Key Fob

After replacing the battery, it’s time to close the key fob. Follow these steps:

If your key fob has a removable key:

– Align the two halves of the key fob together, ensuring that the buttons and key slot are properly aligned.
– Apply gentle pressure to snap the two halves back together.

If your key fob is keyless:

– Align the two halves of the key fob together, ensuring that the buttons are properly aligned.
– Apply gentle pressure to snap the two halves back together.

Step 5: Test the Key Fob

With the new battery in place and the key fob closed, it’s time to test if the battery replacement was successful. Take the following steps to test your key fob:

– Stand near your Ford vehicle and press the buttons on the key fob to ensure they are working correctly.
– Test the functions of the key fob, such as locking, unlocking, and opening the trunk. Verify that they operate smoothly.

Changing the battery in a Ford key fob for the 2020 model year is a simple and straightforward process. By following the steps outlined in this article, you can easily replace the battery in your key fob and ensure its continued functionality. Remember to take note of the battery type and size, and handle the key fob with care to avoid damage. With a fresh battery, you can enjoy the convenience and security provided by your Ford key fob for years to come.

Frequently Asked Questions

How do I change the battery in my Ford key fob for a 2020 model?

To change the battery in your Ford key fob for a 2020 model, follow these steps:

What type of battery does the Ford key fob for a 2020 model use?

The Ford key fob for a 2020 model typically uses a CR2032 coin cell battery. It is a common type of battery available at most stores.

Where can I find the battery compartment in my Ford key fob for a 2020 model?

The battery compartment in the Ford key fob for a 2020 model is usually located at the back of the key fob. Look for a small indentation or groove on the edge of the key fob where you can insert a small tool to open it.

Do I need any tools to replace the battery in my Ford key fob for a 2020 model?

Yes, you will need a small flathead screwdriver or a pry tool to open the battery compartment in the Ford key fob for a 2020 model. Make sure to use a tool with a soft tip to avoid damaging the key fob.

How do I open the battery compartment in my Ford key fob for a 2020 model?

Insert a small flathead screwdriver or a pry tool into the groove or indentation on the edge of the key fob. Gently twist or pry the tool to pop open the battery compartment.

How do I insert the new battery into my Ford key fob for a 2020 model?

Once you have opened the battery compartment, remove the old battery and replace it with a new CR2032 coin cell battery. Make sure to align the battery properly with the positive (+) and negative (-) markings before closing the battery compartment.

Final Thoughts

Changing the battery in your Ford key fob for the 2020 model is a simple and straightforward process. Start by locating the small slot on the side of the key fob and using a thin object, such as a coin or a small screwdriver, to gently pry it open. Once opened, you will see the battery compartment. Carefully remove the old battery and replace it with a new one, making sure the positive (+) side is facing up. Close the key fob by aligning the two halves and pressing them together until they snap into place. Changing the battery in your Ford key fob 2020 is quick and easy, ensuring that you can continue to use it without any hassle.