Looking to change the battery in your Ford Fusion key fob? We’ve got you covered! In this article, we’ll guide you step-by-step through the process of replacing the battery in your key fob, ensuring that you can continue using it without any hassle. With our easy-to-follow instructions, you’ll have your key fob up and running again in no time. So, let’s dive right in and learn how to change the battery in your Ford Fusion key fob.
How to Change the Battery in a Ford Fusion Key Fob
The Ford Fusion key fob is an essential accessory that allows you to unlock and lock your car with ease. However, like any other electronic device, the key fob’s battery will eventually run out, requiring a replacement. If you find yourself in this situation, don’t worry! In this comprehensive guide, we will walk you through the step-by-step process of changing the battery in your Ford Fusion key fob. By the end, you’ll be back on the road with a fully functional key fob.
1. Gather the Necessary Materials
Before you start, make sure you have all the materials you’ll need for the battery replacement:
- Replacement battery: Look for a CR2032 3-volt lithium coin cell battery, which is commonly used in Ford Fusion key fobs.
- Small flathead screwdriver: This will be used to open the key fob casing.
2. Determine the Type of Key Fob
Ford Fusion key fobs come in different variations depending on the year and model of your vehicle. The two main types are the basic key fob and the remote start key fob. The process of changing the battery may slightly differ between the two.
Basic Key Fob
If your key fob doesn’t have remote start functionality, follow these steps:
- Locate the release latch: On the back of the key fob, you’ll find a small release latch or button. This latch is used to open the key fob casing.
- Press the release latch: Use your thumb or a small flathead screwdriver to press and hold the release latch. While holding the latch down, pull the key ring end of the key fob away from the key fob body. This will release the battery compartment cover.
- Remove the old battery: Once the battery compartment cover is open, use your fingertip or a small flathead screwdriver to carefully remove the old battery from its slot. Pay attention to the battery’s orientation to ensure you install the new one correctly.
- Insert the new battery: Take the new CR2032 battery and place it into the empty slot, ensuring the positive side is facing up. Gently press the battery down to ensure it is securely in place.
- Reassemble the key fob: Line up the key fob body with the battery compartment cover. Press the two halves together until you hear a click, indicating that they are securely fastened.
Remote Start Key Fob
If your key fob includes remote start functionality, follow these steps:
- Locate the rectangular release button: On the back of the key fob, you’ll find a rectangular release button near the bottom edge. This button is used to open the key fob casing.
- Press the release button: Using your thumb or a small flathead screwdriver, press and hold the release button. While holding the button down, slide the key out of the key fob body.
- Separate the two halves: Once the key has been removed, you can separate the two halves of the key fob by gently pulling them apart.
- Remove the old battery: Locate the battery compartment within the key fob. Carefully remove the old battery using your fingertip or a small flathead screwdriver.
- Insert the new battery: Take the new CR2032 battery and place it into the empty slot, ensuring the positive side is facing up. Make sure the battery is securely positioned.
- Reassemble the key fob: Line up the two halves of the key fob and press them together until you hear a click, indicating that they are securely fastened.
- Reinsert the key: Slide the key back into the key fob body until it is fully inserted. Ensure that the key is aligned correctly.
3. Test the Key Fob
Now that you have successfully changed the battery in your Ford Fusion key fob, it’s time to test its functionality.
- Stand near your Ford Fusion: Make sure you are within range of the car.
- Press any button: Press any button on the key fob to test if the battery replacement was successful.
- Confirm the response: If you see a response from your car, such as the doors locking or unlocking, the battery replacement was successful.
4. Dispose of the Old Battery Responsibly
Properly disposing of the old battery is important for both the environment and safety reasons. Most local recycling centers or automotive stores have designated drop-off points for used batteries. Contact your local recycling center or automotive store to learn about their battery recycling programs and safely dispose of your old battery.
Remember, regular maintenance and battery replacements are essential to keep your Ford Fusion key fob in working order. By following this guide, you’ve successfully replaced the battery and ensured that your key fob will continue to serve its purpose effectively. Enjoy the convenience of seamlessly locking and unlocking your car with ease.
Frequently Asked Questions
How do I change the battery in my Ford Fusion key fob?
To change the battery in your Ford Fusion key fob, follow these steps:
What type of battery does the Ford Fusion key fob use?
The Ford Fusion key fob typically uses a CR2032 lithium coin cell battery. However, it’s always a good idea to check your vehicle’s owner’s manual or consult with a Ford dealership to ensure you have the correct battery for your specific key fob model.
Where is the battery located in the Ford Fusion key fob?
The battery in the Ford Fusion key fob is located underneath the plastic cover. Look for a small groove or slot on the side of the key fob where you can insert a flathead screwdriver or a coin to pry open the cover.
How do I open the key fob to access the battery?
To open the key fob, insert a small flathead screwdriver or a coin into the slot or groove on the side and gently pry open the cover. Be careful not to apply too much force to avoid damaging the key fob.
Once I have opened the key fob, how do I remove the old battery?
After opening the key fob, you should see the battery compartment. Carefully remove the old battery by sliding it out from its slot. Take note of its orientation and ensure you replace it with a new battery in the same position.
How do I insert the new battery into the Ford Fusion key fob?
To insert the new battery, simply slide it into the empty slot in the same orientation as the old battery. Make sure it fits firmly into place. Once the new battery is inserted, gently close the cover of the key fob until it snaps shut.
Final Thoughts
To change the battery in your Ford Fusion key fob, follow these simple steps. First, locate the small indentation on the side of the key fob. Insert a small flathead screwdriver and gently pry it open. Inside, you will find the battery. Remove the old battery and replace it with a new one, ensuring it is properly aligned. Then, snap the key fob back together. Changing the battery in your Ford Fusion key fob is a quick and easy process that can be done at home. By following these steps, you’ll have a fully functional key fob in no time.
