Looking to change the battery in your 2020 Silverado key fob? We’ve got you covered! In this guide, we’ll walk you through the simple steps to switch out the battery and get your key fob back up and running in no time. Don’t worry, it’s easier than you might think. So, if you’re ready to learn how to change the battery in your 2020 Silverado key fob, let’s get started!
How to Change the Battery in a 2020 Silverado Key Fob
The key fob for your 2020 Silverado is an essential component that allows you to easily lock, unlock, and start your vehicle. Like any electronic device, the key fob requires a battery to function properly. Over time, the battery may run out of power and need to be replaced. In this guide, we will walk you through the step-by-step process of changing the battery in your 2020 Silverado key fob.
Gather the Necessary Tools and Materials
Before you begin, it’s important to gather all the necessary tools and materials to ensure a smooth battery replacement process. Here’s what you’ll need:
- A replacement battery: The 2020 Silverado key fob uses a CR2032 battery, which is widely available at electronics stores or online.
- A small flat-head screwdriver: This will be used to open the key fob’s cover.
- A clean cloth or towel: This will help protect the key fob’s surface during the battery replacement process.
Step 1: Locate the Key Fob’s Battery Compartment
The battery compartment in the 2020 Silverado key fob is located on the backside of the fob. To access it, flip the key fob over so that the buttons are facing down.
Step 2: Remove the Old Battery
Using a small flat-head screwdriver, carefully insert the tip into the slot located on the side of the key fob. Gently twist the screwdriver to pop open the key fob’s cover. Be cautious not to use excessive force to avoid damaging the key fob.
Once the cover is open, you will see the battery. It’s essential to handle the battery with care, ensuring not to touch the contacts with your bare hands. Touching the contacts can reduce the battery’s lifespan and affect its performance.
Using the screwdriver, gently pry out the old battery from its compartment.
Step 3: Insert the New Battery
Take your replacement CR2032 battery and carefully insert it into the battery compartment. Ensure the battery is properly aligned with the positive (+) side facing up.
Step 4: Close the Key Fob’s Cover
Place the key fob’s cover back over the battery compartment, aligning it with the slots on the edges. Press down firmly until you hear a click, indicating that the cover is securely in place.
Step 5: Test the Key Fob
Now that you have replaced the battery, it’s time to test the key fob to ensure it is functioning correctly. Stand near your vehicle and press the lock or unlock button on the key fob. If your vehicle responds accordingly, then you have successfully replaced the battery.
Tips and Precautions
Here are a few additional tips and precautions to keep in mind when changing the battery in your 2020 Silverado key fob:
- Always use a fresh CR2032 battery from a reputable brand to ensure optimal performance.
- Keep the key fob away from water or excessive moisture to avoid damage.
- If you’re unsure about handling the key fob or replacing the battery yourself, consider seeking assistance from a professional or contacting your local Chevrolet dealership.
- Properly dispose of the old battery by taking it to a recycling center or following your local regulations.
By following these steps and precautions, you can easily change the battery in your 2020 Silverado key fob and continue enjoying the convenience it offers. Remember to regularly check the battery’s performance and replace it as needed to ensure uninterrupted functionality of your key fob.
Frequently Asked Questions
How do I change the battery in my 2020 Silverado key fob?
To change the battery in your 2020 Silverado key fob, follow these steps:
What type of battery does the 2020 Silverado key fob use?
The 2020 Silverado key fob uses a CR2032 3V lithium battery. Make sure to use the correct type of battery for optimal performance.
Where is the battery located in the 2020 Silverado key fob?
The battery is located inside the key fob. To access it, you will need to open the key fob casing. Refer to your vehicle’s owner’s manual for specific instructions on how to open the key fob.
Do I need any tools to change the battery in my 2020 Silverado key fob?
No, you do not need any special tools to change the battery in your 2020 Silverado key fob. Most key fobs can be opened using a small flathead screwdriver or a coin.
How do I replace the battery in my 2020 Silverado key fob?
To replace the battery, carefully pry open the key fob casing using a small flathead screwdriver or a coin. Once the casing is open, locate the battery and remove it. Insert the new battery in the same orientation as the old battery and close the key fob casing.
What should I do if my 2020 Silverado key fob doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, try reprogramming it. Refer to your vehicle’s owner’s manual for instructions on how to reprogram the key fob. If the issue persists, it may be necessary to visit a Chevrolet dealership for further assistance.
Final Thoughts
To change the battery in a 2020 Silverado key fob, follow these simple steps. First, locate the small groove on the side of the key fob and use a small flathead screwdriver to gently pry it open. Once open, you will see the battery compartment. Remove the old battery and replace it with a new CR2032 battery, making sure it is inserted correctly. Finally, close the key fob and test it to ensure it is working properly. Changing the battery in your 2020 Silverado key fob is a quick and easy process that will keep you on the road without any interruptions.