In 2020, one of the most common issues Mazda CX-5 owners encounter is a key fob with a dead battery. So, how can you change the battery in your 2020 Mazda CX-5 key fob? Don’t worry, I’ve got you covered! This article will guide you through the simple steps to replace the battery in your key fob, allowing you to get back to seamlessly unlocking and starting your car. Whether you’re a seasoned DIY enthusiast or a newbie to car maintenance, this straightforward process will have you back on the road in no time. So, let’s dive in and learn how to change the battery in your 2020 Mazda CX-5 key fob.
How to Change Battery in 2020 Mazda CX-5 Key Fob
Introduction
The 2020 Mazda CX-5 is known for its sleek design, advanced features, and exceptional performance. One of the essential components of this vehicle is the key fob. It not only allows you to unlock and lock your car but also provides additional functionalities like remote start. Over time, the battery in your key fob may run out of power, requiring a replacement. In this guide, we will walk you through the process of changing the battery in your 2020 Mazda CX-5 key fob, ensuring that you can continue to enjoy the convenience it offers.
Step-by-Step Guide
Changing the battery in your 2020 Mazda CX-5 key fob is a straightforward process that you can do yourself. Follow these steps:
Step 1: Gather the Necessary Tools
Before you begin, make sure you have the right tools to complete the task. You will need:
- A small flathead screwdriver or a similar tool to pry open the key fob
- A new CR2025 battery, or a battery that is compatible with your key fob
Step 2: Locate the Key Fob Slot
The key fob slot in the 2020 Mazda CX-5 is usually located on the driver’s side, near the steering wheel. Look for a small indentation or a rectangle-shaped slot.
Step 3: Open the Key Fob
Insert the small flathead screwdriver or a similar tool into the slot and gently pry open the key fob. Be careful not to apply too much force to avoid damaging the key fob.
Step 4: Remove the Old Battery
Once the key fob is open, you will see the battery. Use your thumb or the screwdriver to carefully remove the old battery from its compartment.
Step 5: Insert the New Battery
Take the new CR2025 battery or the compatible battery and place it into the battery compartment with the positive (+) side facing up. Make sure the battery is securely in place.
Step 6: Close the Key Fob
With the new battery in place, align the two halves of the key fob and carefully snap them back together. Ensure that the key fob is fully closed and there are no gaps.
Step 7: Test the Key Fob
Once the key fob is closed, test it by pressing the buttons to make sure it is functioning properly. If the buttons are responsive, you have successfully changed the battery in your 2020 Mazda CX-5 key fob.
Tips and Precautions
While changing the battery in your key fob is a simple task, it’s important to keep a few tips and precautions in mind:
- Handle the key fob with care to avoid any accidental damage.
- If you are uncertain about the battery type, refer to your vehicle’s owner’s manual or consult a Mazda dealership.
- Always use a fresh and compatible battery to ensure optimal performance.
- Dispose of the old battery responsibly by following local recycling guidelines.
Changing the battery in your 2020 Mazda CX-5 key fob is a quick and simple process that you can easily do at home. By following the step-by-step guide outlined in this article, you can ensure that your key fob continues to function smoothly, allowing you to enjoy the convenience and features it offers. Remember to handle the key fob and the battery with care, and always use a fresh and compatible battery for optimal performance. With a properly functioning key fob, you can confidently enjoy your 2020 Mazda CX-5 experience without any hassle.
Frequently Asked Questions
How do I change the battery in my 2020 Mazda CX-5 key fob?
To change the battery in your 2020 Mazda CX-5 key fob, follow these steps:
What type of battery is required for the 2020 Mazda CX-5 key fob?
The 2020 Mazda CX-5 key fob requires a CR2025 coin cell battery.
How do I open the Mazda CX-5 key fob to access the battery?
To open the Mazda CX-5 key fob, locate the small indentation on the side of the key fob. Insert a small flat-head screwdriver or a coin into the indentation and gently twist to separate the two halves of the key fob.
How do I remove the old battery from the Mazda CX-5 key fob?
Once the key fob is open, you will see the battery compartment. Carefully remove the old battery by gently lifting it out of the compartment using your thumb or a small tool. Take note of the battery’s orientation before removing it.
How do I insert the new battery into the Mazda CX-5 key fob?
Place the new CR2025 battery into the battery compartment, ensuring that it is properly aligned with the markings inside. Press the battery down firmly to secure it in place.
How do I reassemble the Mazda CX-5 key fob?
To reassemble the key fob, align the two halves together and gently press them until they snap back into place. Make sure they are securely joined.
Final Thoughts
To change the battery in your 2020 Mazda CX-5 key fob, follow these simple steps. First, locate the small indentation on the side of the key fob and use a small flathead screwdriver or a coin to gently pry it open. Inside, you will find the battery. Remove the old battery and replace it with a new one, ensuring the positive and negative sides are correctly aligned. Finally, snap the key fob back together. By following these steps, you can easily change the battery in your 2020 Mazda CX-5 key fob and keep it functioning smoothly.
