Changing the battery in your 2020 Kia Forte key fob is a simple and straightforward task that can save you time and money. Wondering how to do it? Well, you’ve come to the right place! In this article, I’ll guide you through the step-by-step process of changing the battery in your 2020 Kia Forte key fob. Don’t worry, it’s easier than you might think! So, let’s get started on how to change the battery in your 2020 Kia Forte key fob and ensure you never find yourself locked out again.
How to Change the Battery in a 2020 Kia Forte Key Fob
The key fob for your 2020 Kia Forte allows you to conveniently lock and unlock your car, as well as control other functions like the panic alarm. Over time, the battery in your key fob may start to lose its charge and need to be replaced. In this article, we will guide you through the process of changing the battery in your 2020 Kia Forte key fob, ensuring that you can continue to use it without any hassle.
Gather the necessary tools and materials
Before you begin, make sure you have the following tools and materials ready:
- New battery (CR2032 3V lithium battery)
- Small flathead screwdriver or a coin
- Clean cloth or tissue
Locate the release button
The 2020 Kia Forte key fob has a small release button that allows you to access the battery compartment. To find the release button, carefully examine the key fob. It is usually located near the edge of the key fob, marked with an arrow or a small indentation.
Open the battery compartment
Once you have located the release button, press and hold it down. While holding the release button, use your other hand to slide the battery compartment cover off. It should easily come off with a little pressure. Set aside the cover in a safe place so you don’t lose it.
Remove the old battery
With the battery compartment open, you will see the old battery. It is important to handle the battery carefully to avoid any accidental damage or injury. Follow these steps to remove the old battery:
- Identify the battery’s positive (+) and negative (-) sides. The CR2032 battery has a specific orientation, so take note of which side is facing up.
- Using a small flathead screwdriver or a coin, gently pry the old battery out. Be cautious not to scratch or damage any components surrounding the battery.
- Once the old battery is loose, carefully lift it out of the key fob and place it aside for proper disposal.
Insert the new battery
Now that the old battery is removed, it’s time to insert the new battery. Follow these steps to ensure correct installation:
- Take the new CR2032 battery and identify its positive (+) and negative (-) sides. They should be clearly marked.
- Align the new battery with the correct orientation, matching the positive and negative sides with the corresponding markings in the key fob.
- Gently press down on the new battery until it clicks into place. Ensure it is secure and properly seated.
Close the battery compartment
Now that the new battery is securely in place, it’s time to close the battery compartment. Follow these steps to properly close the compartment:
- Retrieve the battery compartment cover you set aside earlier.
- Align the cover with the key fob and carefully slide it back into position until it clicks into place.
- Give the cover a gentle tug to ensure it is securely closed.
Test the key fob
With the new battery installed and the battery compartment closed, it’s time to test your key fob. Stand close to your Kia Forte, press the lock or unlock button, and check if the vehicle responds accordingly. If everything is working correctly, congratulations! You have successfully changed the battery in your 2020 Kia Forte key fob.
Dispose of the old battery responsibly
Remember to properly dispose of the old battery. Lithium batteries should not be thrown away with regular household waste. Check your local regulations for appropriate recycling or disposal options. Recycling centers and many electronic retailers often have battery recycling programs in place.
Conclusion
Changing the battery in your 2020 Kia Forte key fob is a simple process that can be done in a few minutes. By following the steps outlined in this guide, you can ensure that your key fob functions properly and allows you to conveniently access and control your vehicle. Remember to handle the batteries with care and dispose of them responsibly. Enjoy the ease and convenience of using your Kia Forte key fob with a new battery.
Frequently Asked Questions
How do I change the battery in my 2020 Kia Forte key fob?
To change the battery in your 2020 Kia Forte key fob, please follow the steps below:
What type of battery is required for the 2020 Kia Forte key fob?
The 2020 Kia Forte key fob requires a CR2032 lithium coin cell battery.
How do I open the key fob to access the battery compartment?
To open the key fob, you can follow these steps:
1. Locate the slot or button on the back of the key fob.
2. Insert a small flathead screwdriver or a coin into the slot or press the button.
3. Gently twist or pry the screwdriver or coin to separate the two halves of the key fob.
How do I remove the old battery from the key fob?
Once you have opened the key fob, you can proceed to remove the old battery:
1. Look for the battery compartment inside the key fob.
2. Carefully lift the battery out of the compartment using a small flathead screwdriver or your fingernail.
3. Dispose of the old battery properly.
How do I install the new battery in the key fob?
To install the new battery, follow these steps:
1. Take the new CR2032 battery out of its packaging and make sure the positive (+) side is facing up.
2. Insert the new battery into the battery compartment, aligning the positive side with the designated area.
3. Gently press the battery down until it is securely in place.
How do I assemble the key fob after replacing the battery?
After replacing the battery, you can reassemble the key fob by following these steps:
1. Align the two halves of the key fob together, making sure the buttons are properly lined up.
2. Apply gentle pressure and carefully snap the two halves back together until they are securely closed.
3. Give the key fob a quick test to ensure all buttons are functioning correctly.
Remember to dispose of the old battery responsibly and observe proper safety precautions when handling batteries. If you encounter any difficulties or need further assistance, it is recommended to consult your vehicle’s owner’s manual or contact a Kia dealership for support.
Final Thoughts
To change the battery in your 2020 Kia Forte key fob, follow these simple steps. First, locate the small notch on the side of the key fob and use a coin or flathead screwdriver to gently pry it open. Once the key fob is open, carefully remove the old battery and replace it with a new one, making sure to align the positive (+) and negative (-) ends correctly. Then, snap the key fob back together and test it to ensure it is functioning properly. With these easy instructions, changing the battery in your 2020 Kia Forte key fob is a quick and hassle-free process.
