Looking to change the battery in your 2019 Toyota Tacoma key fob? Don’t worry, we’ve got you covered! In this article, we’ll walk you through the simple steps to replace the battery and get your key fob back to working condition. No need to search for answers elsewhere, as we have all the information you need right here. So, let’s dive in and learn how to change the battery in your 2019 Toyota Tacoma key fob, ensuring that you can continue to enjoy the convenience and functionality it provides.
How to Change the Battery in a 2019 Toyota Tacoma Key Fob
Introduction
The key fob for your 2019 Toyota Tacoma is a convenient accessory that allows you to lock/unlock your truck remotely, as well as activate the panic alarm and trunk release function. Just like any other battery-powered device, the key fob’s battery will eventually run out of power and need to be replaced. In this guide, we will walk you through the step-by-step process of changing the battery in your 2019 Toyota Tacoma key fob, ensuring that you can continue to enjoy the convenience it offers.
What You Will Need
Before you start, make sure you have the following items ready:
- A replacement battery (CR2032 lithium coin cell)
- A small flathead screwdriver or plastic pry tool
- A clean cloth or tissue
Step 1: Locate the Battery Compartment
To begin, take a look at your key fob. Notice the seam along the edge of the key fob? This is the access point to the battery compartment. Use your small flathead screwdriver or plastic pry tool to gently lift the cover along the seam. Be careful not to apply too much pressure as you don’t want to damage the key fob.
Step 2: Remove the Old Battery
Once the cover is lifted, you will see the old battery inside the compartment. Carefully remove the old battery by gently pushing it out with your finger or by using the small flathead screwdriver. Take note of the battery’s orientation, making sure you remember which side is facing up.
Step 3: Insert the New Battery
Now it’s time to insert the new battery. Take your replacement CR2032 lithium coin cell battery and ensure that the positive (+) side is facing up. Align the new battery with the contacts inside the compartment and gently press it into place. You should feel a slight click when the battery is securely inserted.
Step 4: Replace the Battery Cover
With the new battery in place, it’s time to secure the battery compartment cover. Align the cover with the key fob and gently push it back into position. You should hear a click when the cover snaps back into place. Ensure that the cover is flush with the key fob, indicating that it is properly secured.
Tips and Precautions
Here are some additional tips and precautions to keep in mind while changing the battery in your 2019 Toyota Tacoma key fob:
- Always use a battery of the same type and size as the original battery (CR2032 lithium coin cell).
- Handle the battery with clean, dry hands to avoid any potential damage or contamination.
- Avoid touching the battery contacts inside the key fob or placing the battery on dirty or dusty surfaces.
- Dispose of the old battery in an appropriate manner and keep it away from children and pets.
- If you experience any issues or difficulties during the battery replacement process, consult your vehicle’s owner’s manual or contact a Toyota dealership for assistance.
Changing the battery in your 2019 Toyota Tacoma key fob is a simple and straightforward process that can be done in just a few minutes. By following the steps outlined in this guide, you can ensure that your key fob remains functional and continues to provide convenience and security for your vehicle. Remember to use the proper battery type, handle the battery with care, and dispose of the old battery responsibly. With a fresh battery in your key fob, you can confidently lock, unlock, and access your 2019 Toyota Tacoma with ease.
Frequently Asked Questions
How do I change the battery in my 2019 Toyota Tacoma key fob?
To change the battery in your 2019 Toyota Tacoma key fob, follow these steps:
What type of battery does the 2019 Toyota Tacoma key fob use?
The 2019 Toyota Tacoma key fob uses a CR2032 3-volt lithium battery.
Where is the battery located in the 2019 Toyota Tacoma key fob?
The battery in the 2019 Toyota Tacoma key fob is located on the backside. You will need to open it up to access the battery compartment.
How do I open the 2019 Toyota Tacoma key fob to access the battery compartment?
To open the 2019 Toyota Tacoma key fob, locate the small slot on the edge of the fob. Use a small flathead screwdriver or a coin to gently pry open the fob. Be careful not to apply too much force to avoid damaging the fob.
Can I replace the battery in the 2019 Toyota Tacoma key fob myself?
Yes, you can replace the battery in the 2019 Toyota Tacoma key fob yourself. It is a simple process that can be done at home by following the steps mentioned above.
Do I need to reprogram the 2019 Toyota Tacoma key fob after changing the battery?
No, you do not need to reprogram the 2019 Toyota Tacoma key fob after changing the battery. Simply replace the old battery with a new one, and the key fob should still work properly.
Final Thoughts
To change the battery in your 2019 Toyota Tacoma key fob, follow these simple steps. First, locate the small slot on the back of the key fob and use a small flathead screwdriver to pry it open. Inside, you will find the old battery. Carefully remove it and replace it with a new CR2032 battery, making sure the positive (+) side is facing up. Then, snap the key fob back together. Now your key fob is ready to use again. By following these instructions, you can easily change the battery in your 2019 Toyota Tacoma key fob.