Looking to change the battery in your 2019 Jeep Cherokee key fob? You’re in luck! In this blog post, we’ll guide you through the simple and straightforward process of replacing the battery in your key fob. No need to worry or stress – we’ve got you covered. So, whether you’re experiencing a low battery warning or simply want to be prepared, keep reading to learn how to change the battery in your 2019 Jeep Cherokee key fob. Ready to get started? Let’s jump right in!
How to Change the Battery in a 2019 Jeep Cherokee Key Fob
Introduction
The key fob is an essential component of modern vehicles, providing convenient access to your car and allowing you to lock and unlock it remotely. Over time, the battery in your key fob may begin to lose its charge, leading to decreased performance. If you own a 2019 Jeep Cherokee, knowing how to change the battery in your key fob is crucial to ensure it continues to function properly. In this guide, we will walk you through the step-by-step process, highlighting any pertinent details for a successful battery replacement.
Gather the Necessary Tools
Before you begin, it’s important to gather all the necessary tools and materials to successfully change the battery in your 2019 Jeep Cherokee key fob. Here’s what you’ll need:
- New CR2032 lithium battery
- Small flathead screwdriver or a coin
- Soft cloth or towel
Locate the Battery Compartment
To begin the battery replacement process, you’ll need to locate the battery compartment on your key fob. The battery compartment is usually located on the back of the key fob and can be accessed by removing a small cover.
Step 1: Identify the Battery Compartment Cover
Examine the back of your key fob to identify the small cover that conceals the battery compartment. The cover may have a distinct shape or a small arrow indicating the direction to open it.
Step 2: Open the Battery Compartment Cover
Using a small flathead screwdriver or a coin, carefully pry open the battery compartment cover. Apply gentle pressure and make sure not to scratch the surface of the key fob. If you encounter resistance, double-check that you are prying in the correct direction.
Step 3: Remove the Old Battery
With the battery compartment cover open, you will see the old battery nestled inside. Use your thumb or a small flathead screwdriver to carefully remove the old battery from its compartment. Take note of the position and orientation of the battery, as you will need to install the new battery in the same manner.
Replace the Battery
Now that you’ve removed the old battery, it’s time to replace it with a new one.
Step 1: Clean the Battery Compartment
Before inserting the new battery, take a moment to clean the battery compartment using a soft cloth or towel. This will help ensure a good connection between the battery and the key fob.
Step 2: Insert the New Battery
Take the new CR2032 lithium battery and carefully align it in the battery compartment, following the same orientation as the old battery. Gently press the new battery into place, making sure it sits securely.
Step 3: Close the Battery Compartment Cover
Once the new battery is in place, close the battery compartment cover by aligning it with the key fob and applying gentle pressure. Ensure that the cover snaps back into place securely.
Test the Key Fob
After replacing the battery, it’s essential to test the key fob to ensure everything is functioning correctly. Here’s how you can test it:
Step 1: Stand Close to Your Vehicle
Position yourself within a reasonable distance from your 2019 Jeep Cherokee, ensuring you are within range for the key fob to communicate with the car.
Step 2: Test the Lock and Unlock Functions
Press the lock and unlock buttons on the key fob to test if the signals are successfully received by your vehicle. Listen for the audible sound of the locks engaging and disengaging, and observe the lights on the vehicle to confirm the signals are working.
Step 3: Check Other Functions
If your key fob has additional functions, such as a panic button or remote start, test those as well to verify their functionality.
Maintaining Key Fob Performance
While changing the battery in your 2019 Jeep Cherokee key fob can rejuvenate its performance, there are a few additional steps you can take to ensure its longevity:
- Keep the key fob dry: Avoid exposing the key fob to excessive moisture, as it can damage the internal components.
- Avoid extreme temperatures: Extreme heat or cold can affect the battery life and overall performance of the key fob.
- Replace batteries promptly: If you notice any signs of decreased performance, such as a weakened signal or difficulty locking/unlocking the vehicle, replace the battery promptly.
- Store spare batteries: It’s always a good idea to have spare batteries on hand in case of emergencies or unexpected battery failures.
Changing the battery in your 2019 Jeep Cherokee key fob is a relatively simple task that can significantly improve its performance. By following the steps outlined in this guide, you can easily replace the battery and ensure that your key fob continues to function flawlessly. Remember to take care of your key fob and promptly address any issues to maintain its performance and convenience.
Frequently Asked Questions
How do I change the battery in my 2019 Jeep Cherokee key fob?
To change the battery in your 2019 Jeep Cherokee key fob, follow these steps:
What type of battery does the 2019 Jeep Cherokee key fob use?
The 2019 Jeep Cherokee key fob uses a CR2032 3-volt lithium coin cell battery.
Where can I purchase a replacement battery for my 2019 Jeep Cherokee key fob?
You can purchase a replacement CR2032 battery for your 2019 Jeep Cherokee key fob from most electronic stores, hardware stores, or online retailers.
How do I open the 2019 Jeep Cherokee key fob to access the battery compartment?
To open the 2019 Jeep Cherokee key fob, locate the small slot on the side of the fob, insert a small flathead screwdriver or a coin into the slot, and gently twist to separate the two halves of the fob.
Once I have opened the key fob, how do I remove the old battery?
After opening the key fob, you will see the battery compartment. Use your fingertip or a small tool to carefully lift out the old battery from its slot.
How do I install the new battery in my 2019 Jeep Cherokee key fob?
Place the new CR2032 battery into the battery slot with the positive (+) side facing up. Press it down gently to ensure it is securely in place.
Final Thoughts
To change the battery in your 2019 Jeep Cherokee key fob, follow these simple steps. First, locate the small slot on the back of the key fob and use a small flathead screwdriver to gently pry it open. Then, carefully remove the old battery and replace it with a new CR2032 battery, ensuring it is properly aligned. Finally, snap the key fob back together and test it to ensure it is functioning correctly. Changing the battery in your 2019 Jeep Cherokee key fob is a quick and easy process that will keep you from being stranded with a dead key fob.
