Looking to change the battery in your 2019 Ford Fusion key fob? We’ve got you covered! No need to worry or search for complex solutions. Here, we will guide you through the simple steps to replace the battery in your key fob. Changing the battery is a quick and straightforward process that anyone can do. So, let’s dive in and learn how to change the battery in your 2019 Ford Fusion key fob, ensuring your key fob remains in optimal working condition for all your vehicle’s needs.

How to Change the Battery in a 2019 Ford Fusion Key Fob

The key fob is an essential component of modern vehicle technology. It not only helps in remotely unlocking and locking your car, but it also allows you to start the engine with a push of a button. However, over time, the battery in your 2019 Ford Fusion key fob may weaken and require replacement.

In this guide, we will walk you through the step-by-step process of changing the battery in your 2019 Ford Fusion key fob. By following these instructions, you can easily replace the battery and ensure that your key fob continues to work smoothly.

Gather the Required Materials

Before you begin the battery replacement process, it’s important to gather all the necessary materials. Here’s what you’ll need:

– New CR2032 3V lithium coin cell battery (available at most electronics and automotive stores)
– Small Phillips-head screwdriver
– Flathead screwdriver or a plastic prying tool (optional)

Step 1: Locate the Battery Compartment

To access the battery in your 2019 Ford Fusion key fob, you’ll first need to locate the battery compartment. Follow these steps:

1. Flip the key fob over so that the backside is facing up.
2. Look for a small indentation or groove on the bottom edge of the key fob.
3. Insert your fingernail (or a small flathead screwdriver) into the groove and gently pry open the key fob.

Step 2: Remove the Old Battery

Once you have opened the key fob, you can proceed to remove the old battery. Follow these steps:

1. Use a small Phillips-head screwdriver to carefully remove the screw holding the battery compartment in place. Keep the screw in a safe place as you will need it later.
2. Lift the battery compartment cover to reveal the old battery.
3. You may notice a small metal clip or holder securing the battery in place. Use a small flathead screwdriver or a plastic prying tool to gently release the clip or holder and remove the old battery.

Step 3: Install the New Battery

With the old battery removed, it’s time to install the new one. Follow these steps:

1. Take your new CR2032 3V lithium coin cell battery and ensure that the positive (+) side is facing up.
2. Insert the new battery into the key fob, making sure it is securely in place.
3. If there was a metal clip or holder, carefully reattach it to secure the new battery.

Step 4: Reassemble the Key Fob

Once you have successfully installed the new battery, it’s time to put the key fob back together. Follow these steps:

1. Align the battery compartment cover with the key fob and press it firmly until it snaps into place.
2. Use the small Phillips-head screwdriver to reinsert the screw and tighten it snugly.

Step 5: Test the Key Fob

After reassembling the key fob, it’s important to test whether the new battery is working correctly. Follow these steps:

1. Stand close to your 2019 Ford Fusion and press any button on the key fob.
2. Check if the vehicle responds by locking, unlocking, or performing other desired functions.

If the key fob is functioning properly, then congratulations! You have successfully changed the battery in your 2019 Ford Fusion key fob. However, if the key fob is still not working, double-check the battery installation and repeat the steps.

Remember to dispose of the old battery properly and ensure it doesn’t end up in the regular trash. Many retailers provide battery recycling services, so be sure to utilize those resources.

Tips and Precautions

Here are a few additional tips and precautions to keep in mind while changing the battery in your 2019 Ford Fusion key fob:

– Use caution when prying open the key fob to avoid damaging the internal components.
– When removing the old battery, be careful not to touch the electronic components or contacts.
– If the key fob buttons become unresponsive after the battery replacement, try reprogramming it. Refer to your vehicle’s user manual or contact a Ford dealership for assistance.
– It’s always a good idea to have a spare battery on hand, so you’re prepared should the key fob battery die unexpectedly.

By following these instructions and taking the necessary precautions, you can easily change the battery in your 2019 Ford Fusion key fob and ensure uninterrupted convenience and security in your everyday driving experience.

Frequently Asked Questions

How do I change the battery in my 2019 Ford Fusion key fob?

To change the battery in your 2019 Ford Fusion key fob, follow these steps:

What type of battery does the 2019 Ford Fusion key fob use?

The 2019 Ford Fusion key fob uses a CR2032 lithium coin battery.

Where is the battery located in the 2019 Ford Fusion key fob?

The battery is located inside the key fob. To access it, you will need to use a small flathead screwdriver or a coin to pry open the key fob casing.

How do I open the 2019 Ford Fusion key fob to replace the battery?

To open the key fob, insert a small flathead screwdriver or a coin into the slot on the edge of the key fob. Gently twist or pry the casing apart to reveal the battery compartment.

What should I do if the key fob doesn’t work after changing the battery?

If the key fob doesn’t work after replacing the battery, try the following steps:

• Make sure the battery is installed correctly, with the positive (+) side facing up.
• Check for any visible damage to the key fob or the battery contacts.
• If the issue persists, you may need to have your key fob reprogrammed by a Ford dealership or a qualified automotive locksmith.

Final Thoughts

To change the battery in your 2019 Ford Fusion key fob, follow these simple steps. First, locate the small slot on the side of the key fob and use a small flathead screwdriver or a coin to gently pry it open. Once open, carefully remove the old battery and replace it with a new CR2032 coin cell battery. Make sure the new battery is inserted with the correct polarity. Finally, snap the key fob back together and test it to ensure it is working properly. Changing the battery in your 2019 Ford Fusion key fob is a quick and easy process that can be done at home without any special tools or expertise.