Is your 2018 Ford Fusion key fob running low on battery? Don’t worry, we’ve got you covered with an easy solution on how to change the battery in your 2018 Ford Fusion key fob. No need to stress or search endlessly for answers – we’ve got all the information you need right here. In this article, we’ll guide you through the step-by-step process, ensuring that you can keep your key fob fully functional. So, let’s dive in and learn how to change the battery in the 2018 Ford Fusion key fob.
How to Change the Battery in a 2018 Ford Fusion Key Fob
Introduction
The key fob is an essential component of modern vehicles, providing convenience and security for drivers. Over time, the battery within the key fob may need to be replaced to ensure proper functioning. In this article, we will walk you through the step-by-step process of changing the battery in a 2018 Ford Fusion key fob.
Tools and Materials Needed
Before diving into the process, it’s important to gather the necessary tools and materials. Here’s what you’ll need:
- A replacement battery: Check your key fob’s user manual or the existing battery for the correct type. The 2018 Ford Fusion key fob typically uses a CR2032 battery.
- A small flathead screwdriver or a pry tool: This will be used to open the key fob casing.
Step 1: Locate the Battery Compartment
To begin, ensure you have a clear and well-lit workspace. Follow these steps to locate the battery compartment in your 2018 Ford Fusion key fob:
- Hold the key fob in your hand with the buttons facing down.
- Locate the small slot on the side of the key fob. This is where you will insert the screwdriver or pry tool to open the casing.
Step 2: Open the Key Fob Casing
Now that you’ve identified the battery compartment, it’s time to open the key fob casing:
- Insert the flathead screwdriver or pry tool into the slot.
- Gently twist or apply pressure to lift the casing away from the key fob.
- Continue prying around the edges until the casing is fully separated.
Step 3: Remove the Old Battery
With the key fob casing open, you can now remove the old battery. Follow these steps:
- Identify the battery within the key fob. It is usually a small, round coin-shaped object.
- Use your fingers or the screwdriver to carefully remove the old battery from its position.
- Ensure you dispose of the old battery properly, in accordance with local regulations.
Step 4: Insert the New Battery
Now it’s time to insert the new battery into the key fob:
- Take the replacement battery and carefully align it with the markings inside the battery compartment. Ensure the positive (+) side is facing up.
- Gently press the battery into place, ensuring it is secure and properly seated.
Step 5: Close the Key Fob Casing
After successfully installing the new battery, it’s time to close the key fob casing:
- Line up the two halves of the key fob casing.
- Apply gentle pressure to snap the casing back together. Ensure all sides are securely closed.
- Give the key fob a gentle shake to ensure there is no rattling or loose parts.
Step 6: Test the Key Fob
With the battery replaced and the key fob reassembled, it’s important to test its functionality:
- Stand near your vehicle and test each button on the key fob.
- Verify that the buttons are responsive and the vehicle responds accordingly (e.g., unlocking or locking the doors).
- If the key fob is not working properly, double-check the battery installation and ensure it is correctly aligned.
Tips and Precautions
To ensure a successful battery replacement and avoid any potential issues, keep these tips and precautions in mind:
- Use caution when opening the key fob casing to avoid damage. Apply gentle pressure and take your time.
- Handle the battery with clean, dry hands to prevent any moisture or dirt from interfering with its performance.
- If the key fob continues to malfunction after replacing the battery, consult your vehicle’s owner’s manual or contact a professional for assistance.
Replacing the battery in your 2018 Ford Fusion key fob is a simple process that can be done at home with minimal tools. By following the step-by-step instructions outlined in this article, you can ensure your key fob continues to operate smoothly, providing convenience and security for your vehicle. Remember to always use the correct battery type and handle it with care.
Frequently Asked Questions
How do I change the battery in my 2018 Ford Fusion key fob?
To change the battery in your 2018 Ford Fusion key fob, please follow these steps:
What type of battery do I need for my 2018 Ford Fusion key fob?
The 2018 Ford Fusion key fob uses a CR2032 lithium coin battery. Make sure to use this specific type of battery for optimal performance.
Where is the battery located in the 2018 Ford Fusion key fob?
The battery is located inside the key fob. To access it, you will need to remove the small cover on the back of the key fob.
How do I remove the battery cover on the 2018 Ford Fusion key fob?
To remove the battery cover, you can use a small flathead screwdriver or a coin to gently pry it open. Insert the tool into the notch on the side and carefully lift the cover off.
Can I replace the battery in my 2018 Ford Fusion key fob myself?
Yes, you can replace the battery in your 2018 Ford Fusion key fob yourself. It is a simple and straightforward process that can be done at home with basic tools.
Are there any precautions I should take when changing the battery in my 2018 Ford Fusion key fob?
When changing the battery, make sure to handle it with clean, dry hands. Avoid touching the battery terminals directly, as this may affect its performance. Additionally, ensure you insert the new battery with the correct polarity (+ and – markings).
Final Thoughts
To change the battery in your 2018 Ford Fusion key fob, follow these simple steps. First, locate the small indentation near the keyring loop on the side of the fob. Insert a small flathead screwdriver or a coin into the slot and gently twist to separate the two halves of the fob. Next, carefully remove the old battery and replace it with a new CR2032 battery, ensuring that the positive side faces upward. Finally, snap the two halves of the fob back together until they are securely in place. By following these steps, you can easily change the battery in your 2018 Ford Fusion key fob.
