Looking to change a relic watch battery? You’ve come to the right place! In this article, I will guide you through the simple steps to replace the battery in your relic watch, saving you time and money. If you’ve ever wondered how to change a relic watch battery, look no further! With a few tools and a little patience, you’ll have your watch ticking again in no time. So grab your screwdriver, let’s get started!

Quick Guide: How to Change a Relic Watch Battery

How to Change a Relic Watch Battery: A Comprehensive Guide

Gathering the Necessary Tools

Before you begin changing the battery in your Relic watch, it’s important to gather all the necessary tools. Here’s a list of what you’ll need:

  • Relic watch with a dead battery
  • Case back opener tool
  • Tweezers
  • New battery (check the manual or manufacturer’s website for the correct battery type)
  • Microfiber cloth
  • Watch movement holder (optional but recommended)

Preparing Your Workspace

Once you have all the tools ready, it’s time to set up your workspace. Follow these steps for a smooth battery replacement process:

  1. Find a clean and well-lit area to work on. A clutter-free table or desk is ideal.
  2. Place a soft cloth or towel on your workspace to prevent any damage to the watch.
  3. Ensure your hands are clean and dry before handling the watch.
  4. Keep your tools organized and within reach for easy access.

Removing the Case Back

To change the battery in your Relic watch, you need to remove the case back. Follow these steps carefully:

  1. Identify the type of case back your watch has. It can be a screw-down case back or a snap-off case back.
  2. If it’s a screw-down case back, use the case back opener tool to unscrew it in a counterclockwise direction.
  3. If it’s a snap-off case back, look for a small notch or groove along the edge. Insert the case back opener tool into the groove and gently apply pressure to pop off the case back.
  4. Once the case back is loose, carefully remove it using your fingers or tweezers. Be cautious not to scratch or damage the watch.

Identifying the Battery Type

Before replacing the battery, you must identify the correct battery type for your Relic watch. Refer to the manual or visit the manufacturer’s website for the specific battery model. It’s essential to use the correct battery to ensure optimal performance and prevent any damage to the watch.

Removing the Old Battery

Now that you know the correct battery type, it’s time to remove the old battery. Here’s how to do it:

  1. Locate the battery inside the watch. It’s usually held in place by a small clip or a screw.
  2. Using tweezers, carefully lift the clip or unscrew the screw to release the old battery.
  3. Take note of the battery’s position and orientation before removing it. This will help you correctly install the new battery later.
  4. Once the old battery is removed, place it aside for proper disposal. Avoid touching the new battery with your bare hands to prevent any contamination.

Installing the New Battery

With the old battery out, it’s time to install the new one. Follow these steps to ensure a proper installation:

  1. Take the new battery and double-check its compatibility with your Relic watch.
  2. If needed, use a microfiber cloth to clean the battery compartment and remove any dust or debris.
  3. Inspect the battery compartment for any signs of corrosion. If you notice corrosion, it’s advisable to take your watch to a professional for cleaning.
  4. Insert the new battery into the compartment, aligning it with the correct polarity (+ and – markings) as noted earlier.
  5. Secure the battery in place by reattaching the clip or tightening the screw, if applicable.

Checking the Watch Functionality

After installing the new battery, it’s important to check if your Relic watch is functioning correctly. Follow these steps to ensure everything is working as expected:

  1. With the battery properly installed, gently press the crown (the small button on the side of the watch) to activate the watch.
  2. Observe the watch hands and other functions to ensure they are moving smoothly.
  3. If your watch has additional features such as a date display or chronograph, make sure they are functioning correctly as well.
  4. Set the time and other settings as needed.

Securing the Case Back

Once you have confirmed that your Relic watch is functioning correctly, it’s time to secure the case back:

  1. Ensure the rubber gasket or sealing ring is clean and properly positioned on the case back to ensure water resistance.
  2. Align the case back with the watch case and gently press it into place.
  3. If you have a screw-down case back, use the case back opener tool to tighten it in a clockwise direction.
  4. If you have a snap-off case back, apply gentle pressure and listen for a click to indicate that it’s securely attached.

Final Touches and Maintenance Tips

Once the case back is secure, your Relic watch battery replacement is complete. Here are a few final touches and maintenance tips to keep in mind:

  • Use a microfiber cloth to clean the exterior of the watch and remove any fingerprints or smudges.
  • Store your watch in a cool and dry place to prevent moisture damage.
  • Consider getting your watch professionally serviced every few years to ensure its longevity and accuracy.
  • Keep spare batteries at hand so you can replace them promptly when needed.

Remember, changing the battery in your Relic watch is a relatively simple process that can save you time and money. By following this comprehensive guide, you can confidently change the battery yourself and keep your watch running smoothly for years to come.

Frequently Asked Questions

How do I change the battery in my Relic watch?

To change the battery in your Relic watch, you can follow these simple steps:

What tools do I need to change the battery in my Relic watch?

To change the battery in your Relic watch, you will need the following tools:

Can I change the battery in my Relic watch myself?

Yes, you can change the battery in your Relic watch yourself by following the provided instructions.

How often should I change the battery in my Relic watch?

The battery in your Relic watch typically lasts for about 1-2 years, depending on usage. It is recommended to change the battery as soon as you notice a decrease in performance.

Where can I purchase a replacement battery for my Relic watch?

You can purchase a replacement battery for your Relic watch from various watch stores, jewelry stores, or online retailers.

Should I take my Relic watch to a professional to change the battery?

While it is possible to change the battery in your Relic watch yourself, if you are unsure or uncomfortable with the process, it is recommended to take your watch to a professional watchmaker or jeweler to ensure proper battery replacement and avoid any potential damage to your watch.

Final Thoughts

Changing a relic watch battery is a simple task that can be done at home with a few basic tools. Start by removing the back cover of the watch using a small screwdriver. Carefully remove the old battery and replace it with a new one, making sure it is the correct size and type. Gently press the back cover back into place and use the screwdriver to secure it. Finally, test the watch to ensure the new battery is functioning properly. By following these steps, you can easily change a relic watch battery at home.