Are you looking to change the battery in your Hyundai key fob? Well, you’ve come to the right place! In this guide, I’ll walk you through the simple steps of how to change the battery in your Hyundai key fob. Don’t worry; it’s a quick and straightforward process that you can easily do yourself. So, let’s dive right in and learn how to change the battery in your Hyundai key fob!

How to Change the Battery in a Hyundai Key Fob

Do you own a Hyundai vehicle and have been experiencing issues with your key fob? Perhaps the buttons are not working properly or it’s simply not responding to your commands. In many cases, the problem can be solved by replacing the battery in your Hyundai key fob. In this guide, we will walk you through the step-by-step process of changing the battery in your Hyundai key fob, so you can get back to using your remote control with ease.

Gather the Necessary Tools

Before you begin, make sure you have the following tools ready:

• A small Phillips head screwdriver
• A fresh CR2032 battery

Identify the Key Fob Type

Hyundai key fobs come in different shapes and sizes depending on the model and year of your vehicle. It’s important to identify the type of key fob you have before proceeding with the battery replacement. Here are the two most common types:

1. Key Fob with a Removable Key Blade:

If your key fob has a small button on the side or bottom, press it to release the key blade. This type of key fob will have a separate slot for the key blade, which can be removed by pulling it out.

2. Key Fob without a Removable Key Blade:

If your key fob does not have a removable key blade, it is a non-traditional key fob. This type typically has a switch or button that releases the key blade when pressed.

Open the Key Fob

Now that you have identified the type of key fob you have, it’s time to open it up to access the battery compartment. Follow these steps:

1. Hold the key fob with the buttons facing down.
2. Locate the small screw on the back of the key fob.
3. Using the small Phillips head screwdriver, carefully unscrew the screw and set it aside in a safe place.
4. Gently pry open the key fob using your fingers or a small flathead screwdriver. Start from one edge and work your way around to avoid damaging the plastic casing.

Remove the Old Battery

With the key fob open, you can now remove the old battery. Follow these steps:

1. Locate the battery compartment. It is typically a small rectangle or circular slot.
2. If the battery is secured with a metal clip, use a small flathead screwdriver to carefully lift the clip and release the battery. If there is no clip, proceed to the next step.
3. Gently slide the battery out of the compartment using your fingers or a small tool.
4. Dispose of the old battery responsibly.

Install the New Battery

Now that the old battery is removed, it’s time to install the new one. Follow these steps:

1. Take the fresh CR2032 battery and orient it correctly. The positive (+) side should be facing up.
2. Slide the new battery into the battery compartment, making sure it fits snugly.
3. If there was a metal clip, use the small flathead screwdriver to secure it over the battery. If not, skip this step.

Close the Key Fob

With the new battery in place, it’s time to close the key fob. Follow these steps:

1. Align the two halves of the key fob enclosure.
2. Press the two halves together firmly until they snap into place.
3. Retrieve the small screw that was set aside earlier and use the Phillips head screwdriver to tighten it back into place.

Synchronize the Key Fob

Now that the battery has been replaced and the key fob is closed, you may need to synchronize it with your vehicle. Refer to your vehicle’s owner’s manual or follow these general steps:

1. Stand within range of your Hyundai vehicle.
2. Press any button on the key fob to synchronize it with the vehicle.
3. Repeat this process for any additional key fobs you have.

And that’s it! You have successfully changed the battery in your Hyundai key fob. Enjoy the convenience of remote access to your vehicle once again.

Frequently Asked Questions

Question: How do I change the battery in my Hyundai key fob?

Answer: To change the battery in your Hyundai key fob, follow these simple steps:

Question: What type of battery does a Hyundai key fob use?

Answer: Hyundai key fobs typically use a CR2032 battery.

Question: How do I open the Hyundai key fob to access the battery?

Answer: Look for a small slot or button on the key fob. Use a small flathead screwdriver or a coin to carefully pry open the key fob and reveal the battery compartment.

Question: How do I remove the old battery from the Hyundai key fob?

Answer: Once you have opened the key fob, gently remove the old battery by pushing it out of its housing or using a small, non-metallic tool to lift it out.

Question: How do I insert the new battery into the Hyundai key fob?

Answer: Take the new CR2032 battery and place it into the battery compartment of the key fob, ensuring that the positive (+) side is facing up. Press it down gently to secure it in place.

Question: How do I close the Hyundai key fob after replacing the battery?

Answer: Align the two halves of the key fob and press them together until you hear a click, indicating that it is securely closed. Make sure the key ring loop is also properly aligned.

Final Thoughts

To change the battery in your Hyundai key fob, start by locating the small slot on the side of the fob. Use a thin tool or a coin to gently pry open the fob. Once open, carefully remove the old battery and replace it with a new one, making sure the positive side is facing up. Close the fob by snapping it back together. Changing the battery in your Hyundai key fob is a simple and cost-effective solution that can ensure smooth operation of your vehicle. So, next time you encounter any issues with your key fob, remember the straightforward process of how to change the battery in your Hyundai key fob.