Looking to replace the battery in your Subaru keyless fob? Well, you’re in luck because we’ve got the solution for you! In this article, we’ll walk you through the simple steps on how to replace the battery in your Subaru keyless fob, ensuring that it continues to function perfectly. No more fumbling at the door or worrying about being locked out – with our easy-to-follow instructions, you’ll have your keyless fob working like new in no time. So, let’s get started on learning how to replace the battery in your Subaru keyless fob.
How to Replace the Battery in Your Subaru Keyless Fob
If you own a Subaru with keyless entry, you may have experienced the frustration of a dead battery in your keyless fob. Luckily, replacing the battery in your Subaru keyless fob is a simple process that you can easily do at home. In this comprehensive guide, we will walk you through the steps needed to replace the battery in your Subaru keyless fob. You’ll be back to using your keyless entry in no time!
Gather the Necessary Tools
Before you begin, make sure you have the following tools ready:
- A small flathead screwdriver
- A new CR2032 battery (check your owner’s manual to confirm the correct battery type)
Step-by-Step Instructions
Now that you have your tools ready, follow these step-by-step instructions to replace the battery in your Subaru keyless fob:
- Identify the battery slot: Turn your keyless fob over and locate the small slot at the bottom. This slot is where you will insert your screwdriver to open the fob.
- Open the keyless fob: Insert the screwdriver into the slot and gently pry open the fob. Be careful not to apply too much force to avoid damaging the fob or injuring yourself.
- Remove the old battery: Once the fob is open, you will see the battery. Carefully lift the battery out using your screwdriver or your fingernail. Take note of which side of the battery is facing up.
- Replace the battery: Take your new CR2032 battery and place it in the same position as the old battery. Ensure that the positive (+) side is facing up.
- Close the keyless fob: With the new battery in place, gently press the two halves of the fob together until you hear a click, indicating that it is securely closed.
Testing Your Keyless Fob
After replacing the battery, it’s important to test your keyless fob to ensure it is working properly. Follow these steps to test the functionality of your keyless fob:
- Stand near your Subaru vehicle and press any button on the keyless fob.
- If the fob is working correctly, you will see the vehicle’s lights flash and hear a beep, indicating that the signal was transmitted successfully.
- If your keyless fob does not work, double-check that the battery was inserted correctly or try replacing the battery again.
Additional Tips and Considerations
Here are a few additional tips and considerations to keep in mind when replacing the battery in your Subaru keyless fob:
- The battery in your keyless fob typically lasts around two to three years, but it may need to be replaced sooner depending on the frequency of use.
- Always use the correct battery type specified in your owner’s manual to ensure optimal performance.
- If you are unsure about replacing the battery yourself, consult your local Subaru dealership or a professional locksmith for assistance.
- Keep spare batteries on hand, especially if you frequently use your keyless fob, to avoid any inconvenience caused by a dead battery.
- Dispose of the old battery properly by recycling it at a designated recycling center or following your local regulations.
In Conclusion
Replacing the battery in your Subaru keyless fob is a straightforward process that you can easily do at home. By following the step-by-step instructions provided in this guide, you can save time and money by not having to visit a dealership or locksmith for a simple battery replacement. Remember to use the correct battery type, test the functionality of your keyless fob after replacement, and consult professionals if needed. Enjoy the convenience of keyless entry with a properly functioning keyless fob!
Frequently Asked Questions
How do I replace the battery in my Subaru keyless fob?
To replace the battery in your Subaru keyless fob, follow these steps:
What type of battery does a Subaru keyless fob use?
A Subaru keyless fob typically uses a CR2032 lithium coin cell battery. It is important to ensure that you have the correct battery type before proceeding with the replacement.
How do I open the Subaru keyless fob to access the battery?
To open the Subaru keyless fob, locate the small indentation or groove on the outer edge of the fob. Insert a small flathead screwdriver or a coin into the groove and gently twist or pry open the fob’s casing. Be careful not to apply excessive force to avoid damaging the fob.
How do I remove the old battery from the Subaru keyless fob?
Once the fob is open, you will see the battery compartment. Use your thumb or a small tool to carefully lift out the old battery from its slot. Take note of the battery’s orientation before removing it to ensure proper installation of the new battery.
How do I install the new battery in the Subaru keyless fob?
With the old battery removed, take the new CR2032 lithium coin cell battery and align it correctly in the battery compartment. Ensure that the positive (+) side of the battery faces up. Gently press the new battery down until it is securely in place.
How do I close the Subaru keyless fob after replacing the battery?
Once the new battery is installed, align the two halves of the keyless fob’s casing and carefully press them together. Make sure the casing closes securely and snaps into place. Test the functionality of the keyless fob to confirm that the battery replacement was successful.
Final Thoughts
To replace the battery in your Subaru keyless fob, follow these simple steps: First, locate the notch on the side of the fob, then use a small flathead screwdriver or a coin to pry it open. Once open, gently remove the old battery and replace it with a new one, making sure the positive (+) side is facing up. Close the fob by aligning the two halves and pressing them together until you hear a click. With these easy steps, you can easily replace the battery in your Subaru keyless fob and ensure it continues to function properly.
