Looking to change the battery in your Subaru key? No worries, we’ve got you covered! In this article, we’ll walk you through the simple and straightforward process of changing the battery in your Subaru key. Whether you’re a Subaru owner experiencing a dead key or just want to be prepared for when the time comes, learning how to change the battery in your Subaru key is a useful skill to have. So, let’s dive right in and discover how to change battery Subaru key in a few easy steps!
How to Change the Battery in a Subaru Key
Introduction
The battery in your Subaru key is an essential component that provides power to the remote functions of your vehicle. Over time, the battery may become weak or die, requiring you to replace it. While the process of changing the battery in a Subaru key may seem challenging at first, it is actually a simple task that can be completed in just a few minutes. In this guide, we will walk you through the step-by-step process of replacing the battery in your Subaru key, ensuring that you can continue using it to unlock and lock your vehicle with ease.
What You Will Need
Before you begin, gather the following items:
- A replacement battery (typically a CR2032 lithium coin cell battery)
- A small flathead screwdriver or a coin
- A clean cloth or paper towel
Step 1: Prepare Your Work Area
To ensure a smooth battery replacement process, it is important to prepare your work area:
- Find a well-lit and clean area where you can comfortably work on your key without losing any small parts.
- Lay a soft cloth or paper towel on your workspace to prevent any scratches or damages to your key.
Step 2: Locate the Battery Compartment
The battery compartment in a Subaru key is usually located on the backside. Look for a small groove or a seam along the edge of the key. Gently insert your fingernail or a small flathead screwdriver into the seam and pry the key open. Alternatively, some Subaru keys have a coin slot for easy access to the battery compartment. Simply insert a coin into the slot and twist to open.
Step 3: Remove the Old Battery
Once the battery compartment is open, you will see the old battery inside. Carefully remove the old battery, taking note of its orientation. Pay attention to the positive (+) and negative (-) markings on the battery as they must align correctly with the contacts in the key.
Step 4: Insert the New Battery
Take the new CR2032 lithium coin cell battery and place it into the battery compartment. Ensure that the positive (+) side of the battery is facing up, aligning it with the positive contact in the key. Press the battery down gently until it clicks into place.
Step 5: Close the Battery Compartment
With the new battery securely in place, carefully close the battery compartment. Press the two halves of the key together firmly until you hear a click, indicating that the key is closed and sealed.
Step 6: Test the Key
Now that you have successfully replaced the battery in your Subaru key, it’s time to test it. Stand close to your vehicle and press the buttons on the key to ensure that the remote functions are working properly. If everything is functioning as expected, congratulations! You have mastered the art of changing the battery in a Subaru key.
Tips and Precautions
Here are some additional tips and precautions to keep in mind while changing the battery in your Subaru key:
- Always use a battery that is compatible with your Subaru key. The CR2032 lithium coin cell battery is the most commonly used battery for Subaru keys.
- Do not touch the battery contacts with your bare hands. Oils and dirt from your skin can interfere with the battery’s performance.
- If your key has a rubber gasket, make sure it is in good condition and properly seated before closing the battery compartment. This will help protect the key from moisture and dust.
- If you are unsure about the battery replacement process or encounter any difficulties, it is recommended to consult the owner’s manual or seek assistance from a Subaru dealership or a professional locksmith.
By following these simple steps and taking the necessary precautions, you can easily change the battery in your Subaru key and ensure that it continues to provide reliable remote functionality for your vehicle. Don’t let a dead battery prevent you from conveniently unlocking and locking your Subaru – with just a few minutes of your time, you’ll have your key powered up and ready to go!
Frequently Asked Questions
How do I change the battery in my Subaru key?
To change the battery in your Subaru key, follow these steps:
What type of battery does my Subaru key use?
The type of battery used in Subaru keys may vary depending on the model and year. It is recommended to refer to your vehicle’s owner’s manual for specific battery information.
Where is the battery located in my Subaru key?
The battery in a Subaru key is typically located inside the key fob. The specific location may vary depending on the model and design. It is advisable to consult your owner’s manual or contact your local Subaru dealership for guidance.
Can I change the battery in my Subaru key myself, or should I seek professional assistance?
Changing the battery in a Subaru key can usually be done by the owner. However, if you are uncertain or uncomfortable performing the task yourself, it is recommended to reach out to a professional who can assist you.
What tools do I need to change the battery in my Subaru key?
To change the battery in your Subaru key, you typically need a small screwdriver, such as a flathead or Phillips head screwdriver, to open the key fob and access the battery compartment. However, the specific tools required may vary depending on the key’s design.
Are there any precautions I should take when changing the battery in my Subaru key?
When changing the battery in your Subaru key, it is important to handle the key and battery with care. Avoid touching the battery terminals directly and ensure the new battery is properly aligned before reassembling the key fob. Following the proper precautions will help prevent any damage and ensure the key functions correctly.
Final Thoughts
To change the battery in your Subaru key, start by locating the small slot on the edge of the key fob. Use a small flathead screwdriver or a coin to gently pry open the key fob. Once opened, you will see the battery compartment. Remove the old battery and replace it with a new one, ensuring the positive and negative sides align correctly. Close the key fob by pressing the halves together until they click back into place. Now you have successfully changed the battery in your Subaru key. Changing the battery in your Subaru key is a simple process that can be done quickly and easily at home.
