Looking to change the battery on your Subaru key fob? Well, you’ve come to the right place! In this article, we’ll walk you through the simple steps to replace the battery in your Subaru key fob, ensuring that you can continue using it without any hassle. No need to search any further; we’ve got you covered! So, let’s dive in and learn how to change the battery on your Subaru key fob easily and effectively.

How to Change Battery on Subaru Key Fob: A Complete Guide

As a Subaru owner, you may find yourself needing to change the battery on your key fob at some point. The key fob, also known as a remote or transmitter, allows you to lock, unlock, and even start your Subaru vehicle without inserting a physical key. To ensure your key fob continues to function properly, it’s essential to know how to change the battery when it becomes weak or dies. In this comprehensive guide, we’ll walk you through the steps of changing the battery on your Subaru key fob, providing detailed instructions and important tips along the way.

Gather the Required Tools and Materials

Before you start, it’s important to gather all the necessary tools and materials to ensure a smooth battery replacement process. Here’s what you’ll need:

1. New battery: Check your Subaru owner’s manual or refer to the key fob’s specifications to determine the correct battery type. The common battery types for Subaru key fobs are CR1620 and CR2025.

2. Small flat-head screwdriver: This tool will be used to pry open the key fob and remove the old battery.

3. Clean cloth or tissue: It’s always a good idea to have a soft cloth or tissue to clean the key fob surfaces during the process.

Step-by-Step Guide to Changing the Battery

Now that you have everything ready, let’s dive into the step-by-step process of changing the battery on your Subaru key fob:

1. Find the battery compartment: On most Subaru key fobs, the battery compartment is located on the backside of the fob. Look for a small slot or groove that indicates the separation point.

2. Open the key fob: Insert the small flat-head screwdriver into the slot or groove and gently twist or pry it open. Be careful not to apply excessive force to avoid damaging the key fob.

3. Remove the old battery: Once the key fob is open, you’ll see the battery secured in a small holder or slot. Use the screwdriver or your finger to carefully lift the old battery out of its place. Take note of the battery’s orientation, as you’ll need to insert the new battery in the same position.

4. Clean the key fob: Before inserting the new battery, take a moment to clean the key fob’s internal and external surfaces with a clean cloth or tissue. This will remove any dirt, dust, or residue that may have accumulated over time.

5. Insert the new battery: Take the new battery and align it correctly with the battery holder or slot. Ensure that the positive (+) and negative (-) sides of the battery match the markings in the key fob. Gently press down on the battery until it is securely in place.

6. Close the key fob: Carefully align the two halves of the key fob and apply gentle pressure to close it back together. You should hear a click or feel the fob snap into place. Double-check that the key fob is fully closed and there are no gaps or openings.

Tips and Additional Information

Here are some important tips and additional information to keep in mind when changing the battery on your Subaru key fob:

• Make sure to use the correct battery type specified for your key fob. Using the wrong battery can lead to compatibility issues or even damage the fob.
• Always handle the batteries with clean, dry hands to prevent any moisture or dirt from coming into contact with the battery terminals.
• If the battery is low, you may experience reduced range or functionality with your key fob. Changing the battery should restore its performance.
• If you’re unsure about the battery replacement process or encounter any difficulties, it’s recommended to consult your Subaru owner’s manual or seek assistance from a professional.
• Properly dispose of the old battery by following local regulations for battery recycling. Do not throw it in the regular trash.

Changing the battery on your Subaru key fob is a relatively simple and straightforward process. By following the step-by-step guide outlined in this article, you’ll be able to replace the battery with ease and ensure that your key fob continues to operate smoothly. Remember to always use the correct battery type, handle the batteries carefully, and consult the owner’s manual or a professional if needed. With a new battery in your Subaru key fob, you’ll have peace of mind knowing that you can securely access and operate your vehicle at all times.

Frequently Asked Questions

How do I change the battery on my Subaru key fob?

To change the battery on your Subaru key fob, follow these steps:

What type of battery does a Subaru key fob use?

A Subaru key fob typically uses a CR2032 battery. However, it’s always a good idea to check your specific key fob model’s manual for the correct battery type.

Where is the battery located in a Subaru key fob?

The battery in a Subaru key fob is usually located underneath the back cover. You will need to remove the cover to access and replace the battery.

How do I remove the back cover of a Subaru key fob?

To remove the back cover of a Subaru key fob, use a small flathead screwdriver or a coin to gently pry it open. Insert the tool into the groove along the edge and apply slight pressure to release the cover.

Can I replace the battery in my Subaru key fob myself?

Yes, replacing the battery in a Subaru key fob is a simple process that can be done at home. Just make sure to use caution when opening the key fob and handling the battery.

Are there any precautions I should take while changing the battery in my Subaru key fob?

When changing the battery in your Subaru key fob, avoid touching the circuitry or any sensitive components. This can help prevent any damage to the key fob. Additionally, make sure to properly dispose of the old battery in an appropriate manner.

Final Thoughts

To change the battery on your Subaru key fob, you can follow these simple steps. First, locate the small groove on the side of the key fob and use a small flathead screwdriver or a coin to pry it open. Once open, carefully remove the old battery and replace it with a new one, making sure the positive side is facing up. Finally, snap the key fob back together, ensuring it is securely closed. By following these instructions, you can easily change the battery on your Subaru key fob and ensure optimal performance.