Looking to remove the battery from your Ring Doorbell 2nd generation? We’ve got you covered! Removing the battery from your Ring Doorbell 2nd generation is a simple process that can be done in just a few steps. In this article, we will walk you through the exact steps on how to remove the battery from your Ring Doorbell 2nd generation. Whether you’re looking to replace the battery or simply need to access it for maintenance, this guide will provide you with everything you need to know. So, let’s get started on how to remove the battery from your Ring Doorbell 2nd generation.

How to Remove the Battery from Ring Doorbell 2nd Generation

The Ring Doorbell 2nd Generation is a popular smart home security device that allows you to monitor and protect your property. While the device is designed to be powered by a battery, there may be situations where you need to remove or replace the battery. In this article, we will guide you through the process of safely removing the battery from your Ring Doorbell 2nd Generation.

Gather the Necessary Tools

Before you start, it’s essential to gather the necessary tools for the battery removal process. You’ll only need a few common household items:

• Screwdriver (Phillips or Torx, depending on the model)
• Step ladder or a stable surface to reach the doorbell
• Clean, dry cloth or microfiber cloth

Power Off the Doorbell

To ensure your safety and prevent any potential damage, start by turning off the power to the Ring Doorbell. Follow these steps:

1. Open the Ring app on your smartphone or tablet.
2. Select the Doorbell device you want to work with.
3. Tap on the settings icon.
4. Find the “Device Settings” option and select it.
5. Scroll down and look for the “General Settings” section.
6. Tap on “Power Management.”
7. Toggle the switch next to “Power Off” to turn off your Ring Doorbell.

Remove the Faceplate

With the power off, you can now proceed to remove the faceplate of your Ring Doorbell 2nd Generation. Follow these steps:

1. Locate the security screw at the bottom of the device near the faceplate.
2. Use a screwdriver (Phillips or Torx, depending on the model) to remove the security screw.
3. Gently slide the faceplate upwards to detach it from the device. Apply slight pressure as needed.
4. Once the faceplate is loose, carefully lift it away from the doorbell.

Detach the Battery

After removing the faceplate, you can now detach the battery from your Ring Doorbell 2nd Generation. Follow these steps:

1. Locate the battery compartment on the backside of the Ring Doorbell.
2. You will see a battery release tab. Push it in to unlock the battery.
3. Once the battery is unlocked, gently slide it out of the doorbell.
4. Handle the battery with care and avoid touching the metal contacts.

Clean the Doorbell

While the battery is removed, take the opportunity to clean the doorbell and its components. Follow these steps:

1. Use a clean, dry cloth or microfiber cloth to wipe away any dust or debris from the doorbell.
2. Take extra care when cleaning the camera lens to avoid scratching it.
3. Inspect the battery compartment for any dirt or corrosion. If necessary, use a soft brush to clean it.

Insert a New Battery or Reinstall the Existing Battery

Now that you have removed and cleaned the battery, it’s time to either insert a new battery or reinstall the existing one. Follow these steps:

1. If you have a new battery, make sure it is fully charged before proceeding.
2. Align the new or existing battery with the battery compartment inside the Ring Doorbell.
3. Slide the battery into the compartment until it locks into place.
4. Ensure that the battery is securely inserted and does not wiggle or move.

Attach the Faceplate

After inserting or reinstalling the battery, you can now attach the faceplate back to your Ring Doorbell 2nd Generation. Follow these steps:

1. Place the faceplate over the doorbell, aligning it with the device.
2. Gently slide the faceplate downwards until it snaps into place.
3. Double-check that the faceplate is securely attached and does not move.

Power On the Doorbell

With the battery replaced and the faceplate attached, it’s time to power on your Ring Doorbell 2nd Generation. Follow these steps:

1. Open the Ring app on your smartphone or tablet.
2. Select the Doorbell device you have been working on.
3. Tap on the settings icon.
4. Find the “Device Settings” option and select it.
5. Scroll down and look for the “General Settings” section.
6. Tap on “Power Management.”
7. Toggle the switch next to “Power Off” to turn on your Ring Doorbell.

Removing the battery from your Ring Doorbell 2nd Generation is a straightforward process that requires a few simple steps. By following the instructions outlined in this article, you can safely replace or clean the battery without any hassle. Remember to always exercise caution and power off the device before handling any internal components. If you encounter any difficulties or have further questions, referring to the Ring Doorbell user manual or contacting Ring customer support will be beneficial.

Frequently Asked Questions

How do I remove the battery from my Ring Doorbell 2nd generation?

To remove the battery from your Ring Doorbell 2nd generation, follow these steps:

Can I remove the battery while the Ring Doorbell is still mounted?

Yes, you can remove the battery while the Ring Doorbell is still mounted. However, it may be easier to remove the battery by taking the device off the mounting bracket.

What tools do I need to remove the battery?

To remove the battery from your Ring Doorbell 2nd generation, you won’t need any additional tools. The battery is designed to be easily removable without any special equipment.

How long does the battery typically last?

The battery in the Ring Doorbell 2nd generation typically lasts between six to twelve months, depending on the usage and environmental factors. It’s important to monitor the battery level through the Ring app to ensure it doesn’t run out of power.

What should I do after removing the battery?

After removing the battery from your Ring Doorbell 2nd generation, you can either recharge it using the provided USB cable or replace it with a fully charged battery. Remember to insert the battery back into the device and securely close the battery compartment before reattaching it to the mounting bracket.

Final Thoughts

To remove the battery from your Ring Doorbell 2nd generation, start by unscrewing the security screw at the bottom of the device. Gently pull the faceplate away from the mounting bracket. Locate the battery release tab on the back of the Doorbell and press it down. Slide the battery out of the Doorbell and disconnect the power connectors. Now you can easily replace or recharge the battery as needed. Remember to always follow safety precautions and consult the user manual for detailed instructions on how to remove the battery from your Ring Doorbell 2nd generation.