Step-By-Step Guide: Changing Battery On 2017 Jeep Grand Cherokee

Changing the battery on your 2017 Jeep Grand Cherokee is a straightforward process that you can easily tackle on your own. If you find yourself in need of a battery replacement, worry not! In this article, we will guide you through the steps involved in changing the battery on your 2017 Jeep Grand Cherokee. Whether you’re a seasoned DIY enthusiast or a novice, this step-by-step guide will provide you with the confidence and knowledge to successfully accomplish this task. So, let’s dive right in and learn how to change the battery on your 2017 Jeep Grand Cherokee!

How to Change the Battery on a 2017 Jeep Grand Cherokee

Introduction

The battery is an essential component of any vehicle, providing the electrical power necessary to start the engine and run various systems. Over time, the battery in your 2017 Jeep Grand Cherokee may degrade or fail, requiring a replacement. While this task may seem daunting, with the right knowledge and tools, changing the battery on your Grand Cherokee can be a straightforward process. In this guide, we will walk you through the step-by-step instructions to help you successfully change the battery in your 2017 Jeep Grand Cherokee.

Gather the Tools and Materials

Before you begin the battery replacement process, it’s important to gather all the necessary tools and materials. Here’s a list of what you’ll need:

New battery that matches the specifications of your 2017 Jeep Grand Cherokee
Socket wrench set
Wire brush
Baking soda
Water
Safety goggles and gloves
Battery terminal cleaner
Battery terminal protector spray

Step-by-Step Battery Replacement Process

Now that you have everything you need, let’s dive into the step-by-step process of changing the battery on your 2017 Jeep Grand Cherokee:

Step 1: Preparation and Safety

1. Park your Grand Cherokee on a level surface and engage the parking brake.
2. Open the hood and locate the battery, usually positioned on the driver’s side of the engine compartment.
3. Put on your safety goggles and gloves to protect your eyes and hands from any potential hazards.

Step 2: Disconnect the Negative Terminal

1. Identify the negative terminal, which is usually marked with a minus (-) sign.
2. Using a socket wrench, loosen the bolt securing the negative terminal.
3. Once loose, carefully lift the negative terminal off the battery post.
4. Wrap the disconnected negative terminal with a cloth or place it away from the battery to avoid accidental contact.

Step 3: Disconnect the Positive Terminal

1. Locate the positive terminal, usually marked with a plus (+) sign.
2. Use a socket wrench to loosen the bolt securing the positive terminal.
3. Lift the positive terminal off the battery post once it’s loose.
4. Like the negative terminal, wrap or place the disconnected positive terminal away from the battery.

Step 4: Remove the Old Battery

1. Inspect the battery tray and hold-down clamp that secures the battery in place.
2. Remove any screws or bolts holding the battery in position.
3. Carefully lift the old battery out of the tray, ensuring not to tip it or spill any battery acid.

Step 5: Clean the Battery Tray and Terminal Connections

1. Inspect the battery tray for any corrosion or debris. If present, use a wire brush to remove it.
2. Mix a solution of baking soda and water to create a paste-like consistency.
3. Apply the baking soda paste to the tray and scrub it with the wire brush to remove any corrosion.
4. Rinse the tray with clean water and dry it thoroughly.
5. Examine the battery terminal connections for any corrosion or buildup. If necessary, use a battery terminal cleaner to remove any residue.
6. Once clean, apply a battery terminal protector spray to prevent future corrosion.

Step 6: Install the New Battery

1. Place the new battery into the battery tray, ensuring it sits securely.
2. Reattach the hold-down clamp and tighten any screws or bolts to secure the battery in place.

Step 7: Connect the Positive Terminal

1. Position the positive terminal over the positive battery post.
2. Slide the terminal onto the post and tighten the bolt using a socket wrench. Ensure it is securely connected.

Step 8: Connect the Negative Terminal

1. Position the negative terminal over the negative battery post.
2. Slide the terminal onto the post and tighten the bolt using a socket wrench. Ensure it is securely connected.

Step 9: Double-Check Connections and Test

1. Ensure all connections are secure and free from any looseness.
2. Close the hood of your Jeep Grand Cherokee.
3. Start the engine to verify that the new battery is functioning correctly.

Changing the battery on your 2017 Jeep Grand Cherokee is a relatively simple task that can be completed with minimal tools and knowledge. By following the step-by-step instructions outlined in this guide, you can confidently replace your Grand Cherokee’s battery and ensure reliable performance. Remember to exercise caution throughout the process, wear appropriate safety gear, and dispose of the old battery properly. With a brand new battery powering your 2017 Jeep Grand Cherokee, you’ll be ready to hit the road with confidence.

Frequently Asked Questions

How do I change the battery on my 2017 Jeep Grand Cherokee?

Changing the battery on your 2017 Jeep Grand Cherokee is a relatively straightforward process. Here are the steps to follow:

What tools do I need to change the battery on my 2017 Jeep Grand Cherokee?

To change the battery on your 2017 Jeep Grand Cherokee, you will need the following tools:

Where is the battery located on a 2017 Jeep Grand Cherokee?

The battery on a 2017 Jeep Grand Cherokee is located in the engine compartment. Specifically, it is situated on the driver’s side, near the front of the vehicle.

How do I disconnect the battery on a 2017 Jeep Grand Cherokee?

To disconnect the battery on your 2017 Jeep Grand Cherokee, follow these steps:

Are there any precautions I should take before changing the battery on my 2017 Jeep Grand Cherokee?

Yes, there are a few precautions you should take before changing the battery on your 2017 Jeep Grand Cherokee:

How long does it take to change the battery on a 2017 Jeep Grand Cherokee?

The time it takes to change the battery on a 2017 Jeep Grand Cherokee can vary depending on your level of experience. On average, it should take about 15-30 minutes.

Final Thoughts

Changing the battery on a 2017 Jeep Grand Cherokee is a simple and straightforward process. To begin, gather the necessary tools such as gloves and a wrench. Locate the battery under the hood and remove the negative cable first, followed by the positive cable. Carefully lift out the old battery and place the new one in its position. Reconnect the positive cable first, followed by the negative cable. Ensure everything is securely tightened and start the vehicle to confirm the successful battery replacement. Following these steps will enable you to change the battery on your 2017 Jeep Grand Cherokee hassle-free.