Is your Subaru key fob running low on battery? Don’t worry, we’ve got you covered! In this article, we will walk you through the simple steps of how to change the battery in your Subaru key fob. With just a few minutes of your time and a fresh battery, you’ll have your key fob back to its full functioning capacity, allowing you to effortlessly lock and unlock your Subaru. So, let’s dive right in and learn how to change the battery in your Subaru key fob!
How to Change Battery in Subaru Key Fob
Introduction
The key fob is a convenient accessory that allows you to lock and unlock your car remotely. However, with time, the battery in your Subaru key fob may need to be replaced. Knowing how to change the battery in your Subaru key fob can save you time and money. In this article, we will guide you through the steps required to change the battery in your Subaru key fob, ensuring that you can continue using it hassle-free.
What You Will Need
Before you begin, make sure you have the following items ready:
- New battery (check your vehicle’s manual for the specific battery type)
- Flathead screwdriver or a small pry tool
- Clean, lint-free cloth
Step 1: Find the Battery Compartment
To change the battery in your Subaru key fob, you first need to locate the battery compartment. Follow these steps:
- Stand near your vehicle and hold the key fob in your hand.
- Look for a small notch or groove on the side of the key fob.
- Using a flathead screwdriver or a small pry tool, gently insert it into the notch and twist to pop open the key fob.
- Once the key fob is open, use your fingers to carefully separate the front and back covers.
Step 2: Remove the Old Battery
With the key fob open, it’s time to remove the old battery. Follow these steps:
- Take a close look at the interior of the key fob. You will see the battery resting in a small compartment.
- Gently lift the old battery out of the compartment, taking care not to damage any other components.
- Use a clean, lint-free cloth to wipe away any dust or debris from the battery compartment.
Step 3: Insert the New Battery
Now that the old battery is removed, it’s time to insert the new one. Follow these steps:
- Take the new battery out of its packaging.
- Verify that the new battery matches the specifications mentioned in your vehicle’s manual.
- With the positive (+) side facing up, carefully place the new battery into the compartment.
- Press down gently to ensure the battery is secure.
Step 4: Reassemble the Key Fob
Once the new battery is in place, it’s time to put the key fob back together. Follow these steps:
- Grab both the front and back covers of the key fob.
- Align the covers so that the buttons and the battery compartment align properly.
- Press the two halves together firmly until you hear a click.
- Give the key fob a gentle shake to make sure it’s securely closed.
Step 5: Test the Key Fob
Now that your Subaru key fob is reassembled with a new battery, it’s time to test it. Follow these steps:
- Stand near your vehicle and press any button on the key fob.
- Observe the response of your Subaru. If it locks or unlocks, your key fob is working correctly.
- If the key fob doesn’t work, double-check that the battery is properly inserted and the key fob is correctly assembled.
Tips and Precautions
When changing the battery in your Subaru key fob, keep the following tips and precautions in mind:
- Always use the correct type of battery as specified in your vehicle’s manual.
- Handle the battery with clean hands and avoid touching the contacts.
- Dispose of the old battery properly and according to local regulations.
- If you’re having trouble opening the key fob, consult your vehicle’s manual or seek assistance from a professional.
- Store spare batteries in a safe place, away from children and pets.
Changing the battery in your Subaru key fob is a relatively simple task that can be done at home. By following the steps outlined in this guide, you can easily replace the battery and continue using your key fob without any issues. Remember to always use the correct battery type and handle the key fob components with care. With a properly functioning key fob, you can enjoy the convenience and security it provides for your Subaru vehicle.
Frequently Asked Questions
How do I change the battery in my Subaru key fob?
To change the battery in your Subaru key fob, follow these steps:
What type of battery does my Subaru key fob require?
Your Subaru key fob typically requires a CR2032 lithium coin battery. However, it’s always recommended to consult your vehicle’s owner’s manual or contact your local Subaru dealership to ensure the correct battery type for your specific key fob model.
Where is the battery located in my Subaru key fob?
The battery in your Subaru key fob is usually located underneath the cover. To access it, look for a small slot or button on the back of the key fob. Use a small flathead screwdriver or a coin to gently pry open the cover and reveal the battery compartment.
How do I replace the battery in my Subaru key fob?
Once you have access to the battery compartment, carefully remove the old battery using your fingernail or a non-metallic tool. Take note of the battery’s orientation, and then insert the new battery into the compartment using the same orientation. Make sure it is securely in place before closing the cover.
Do I need to reprogram my Subaru key fob after changing the battery?
In most cases, you do not need to reprogram your Subaru key fob after changing the battery. However, if you notice any issues with the key fob’s functionality, such as the remote not working properly, it’s recommended to consult your vehicle’s owner’s manual or contact your local Subaru dealership for further assistance.
Can I change the battery in my Subaru key fob by myself or should I seek professional help?
Changing the battery in your Subaru key fob is typically a simple process that you can do yourself. However, if you are unsure or uncomfortable with handling the key fob or if you encounter any difficulties during the battery replacement, it’s recommended to seek professional help from your local Subaru dealership or a qualified automotive technician.
Final Thoughts
To change the battery in your Subaru key fob, start by prying open the key fob using a small flathead screwdriver. Once open, carefully remove the old battery and replace it with a new one, making sure the positive side is facing up. Close the key fob by pressing it together until it snaps shut. Your Subaru key fob is now ready to use with its new battery! Changing the battery in your Subaru key fob is a simple process that ensures your key fob remains functional and enables you to continue using it to lock and unlock your vehicle effortlessly.
