Are you wondering how to install a Ring Battery Doorbell Plus? Look no further! In this blog article, we will guide you through the simple steps to set up your Ring Battery Doorbell Plus and enhance the security of your home. With our easy-to-follow instructions and helpful tips, you’ll have your doorbell up and running in no time. So, let’s dive in and learn how to install a Ring Battery Doorbell Plus to keep your home safe and secure.

How to Install a Ring Battery Doorbell Plus

Installing a Ring Battery Doorbell Plus is a great way to enhance the security of your home. This smart doorbell offers advanced features, including high-quality video recording, motion detection, and two-way audio communication. In this guide, we will walk you through the step-by-step process of installing a Ring Battery Doorbell Plus. Let’s get started!

Gather Your Tools and Materials

Before you begin the installation process, make sure you have the following tools and materials ready:

• Ring Battery Doorbell Plus
• Screwdriver (included in the Ring Doorbell package)
• Drill
• Drill bit appropriate for your exterior wall
• Level
• Anchors (if necessary)
• Silicone sealant
• Wi-Fi network and password
• Smartphone or tablet with the Ring app installed

Charge the Ring Battery Doorbell Plus

Before installing the doorbell, make sure to charge it fully. Follow these steps to charge your Ring Battery Doorbell Plus:

1. Remove the faceplate of the doorbell by pressing the release button located at the bottom.
2. Detach the battery pack from the doorbell.
3. Connect the battery pack to a USB charger using the provided cable.
4. Allow the battery pack to charge until it reaches 100%.
5. Once fully charged, reattach the battery pack to the doorbell.
6. Put the faceplate back on by aligning the slots and pressing it into place.

Prepare Your Doorbell Mounting Location

Now that your Ring Battery Doorbell Plus is charged, it’s time to prepare the mounting location. Follow these steps:

1. Choose a suitable location near your front door, at a height of 48 inches above the ground.
2. Ensure the mounting location has a strong Wi-Fi signal.
3. Take note of the type of exterior wall you have (wood, brick, stucco, etc.) as you may need different tools or materials for installation.
4. Use a level to ensure the mounting surface is straight.

Install the Mounting Bracket

The next step is to install the mounting bracket. Follow these instructions:

1. Hold the mounting bracket against the wall at the desired location.
2. Using a pencil, mark the screw holes on the wall.
3. If necessary, use a drill to create pilot holes for the screws or anchors.
4. If using anchors, insert them into the pilot holes.
5. Align the screw holes on the mounting bracket with the pilot holes or anchors.
6. Secure the mounting bracket to the wall using the provided screws.
7. Double-check that the mounting bracket is level.

Attach the Ring Battery Doorbell Plus

With the mounting bracket in place, it’s time to attach the Ring Battery Doorbell Plus. Follow these steps:

1. Remove the faceplate of the doorbell by pressing the release button located at the bottom.
2. Align the slots on the back of the doorbell with the tabs on the mounting bracket.
3. Gently press the doorbell onto the mounting bracket until it clicks into place.
4. Put the faceplate back on by aligning the slots and pressing it into place.
5. Ensure that the doorbell is securely attached to the mounting bracket.

Connect the Ring Doorbell to Your Wi-Fi Network

Now, it’s time to connect your Ring Battery Doorbell Plus to your Wi-Fi network. Follow these instructions:

1. Download and install the Ring app on your smartphone or tablet.
2. Open the Ring app and create a new Ring account or log in to your existing one.
3. Tap the “Set Up Device” button and select “Doorbells” from the list of available devices.
4. Follow the on-screen instructions to put your Ring Doorbell into setup mode.
5. Select your Wi-Fi network from the list of available networks.
6. Enter your Wi-Fi password and wait for the Ring Doorbell to connect.
7. Once connected, you can customize the settings and preferences of your Ring Doorbell through the app.

Test Your Ring Battery Doorbell Plus

Congratulations! You have successfully installed your Ring Battery Doorbell Plus. Before finishing, take some time to test its functionality:

1. Press the doorbell button to check if it triggers an alert on your smartphone or tablet.
2. Use the two-way audio feature to communicate with anyone near the doorbell.
3. Adjust the motion detection settings to ensure it is capturing the desired area.
4. Check the video quality and make any necessary adjustments.

Installing a Ring Battery Doorbell Plus is a straightforward process that can significantly enhance the security of your home. By following the steps outlined in this guide, you can easily install and set up your Ring Doorbell, allowing you to monitor your front door and receive alerts whenever someone is at your doorstep. Enjoy the peace of mind that comes with having a smart and reliable home security solution!

Frequently Asked Questions

How do I install a Ring Battery Doorbell Plus?

To install a Ring Battery Doorbell Plus, follow these steps:

What tools do I need to install a Ring Battery Doorbell Plus?

To install a Ring Battery Doorbell Plus, you will need the following tools:

Can I install a Ring Battery Doorbell Plus without an existing doorbell?

Yes, you can install a Ring Battery Doorbell Plus even if you don’t have an existing doorbell. The Ring Battery Doorbell Plus is designed to be easily installed using the included mounting bracket and screws.

How do I connect the Ring Battery Doorbell Plus to my Wi-Fi?

To connect the Ring Battery Doorbell Plus to your Wi-Fi network, follow these steps:

Where should I place my Ring Battery Doorbell Plus?

When choosing a location for your Ring Battery Doorbell Plus, consider the following:

How do I set up motion detection on my Ring Battery Doorbell Plus?

To set up motion detection on your Ring Battery Doorbell Plus, follow these instructions:

Final Thoughts

Installing a Ring Battery Doorbell Plus is a simple process that can enhance the security of your home. To begin, ensure you have a stable Wi-Fi connection and a fully charged battery. Then, download the Ring app and create an account. Follow the app’s instructions to scan the QR code on the device and connect it to your Wi-Fi network. Once connected, securely position the doorbell where desired. The Ring Battery Doorbell Plus offers proactive motion detection, crisp video quality, and customizable settings to suit your needs. With its easy installation and advanced features, the Ring Battery Doorbell Plus is an excellent choice for home security.