If you’re looking for a quick and simple solution on how to change the battery in a Subaru key fob, you’ve come to the right place. We understand the frustration of a dead key fob, and that’s why we’re here to help. In this article, we’ll guide you through the easy steps to replace the battery in your Subaru key fob, ensuring that you can get back to using your key fob without any hassle. So, let’s dive right into how to change the battery in a Subaru key fob and get you back on the road in no time.
**How to Change the Battery in a Subaru Key Fob**
Introduction
Changing the battery in a Subaru key fob is a simple and straightforward process that can save you time and money. When the battery in your key fob starts to weaken, you may notice that it becomes less responsive or stops working altogether. By replacing the battery, you can ensure that your key fob continues to function properly. In this article, we will guide you through the step-by-step process of changing the battery in a Subaru key fob.
Tools and Materials You Will Need
Before we get started, let’s gather the tools and materials required for this task. Here’s what you’ll need:
– A new CR2032 coin cell battery (make sure it is compatible with your Subaru key fob)
– A small flathead screwdriver or a plastic pry tool
– A clean cloth or tissue
– Optional: Isopropyl alcohol and cotton swabs for cleaning the key fob contacts
Step-by-Step Guide: How to Change the Battery in a Subaru Key Fob
Step 1: Locate the Battery Compartment
The first step is to locate the battery compartment on your Subaru key fob. The exact location may vary depending on the model and year of your vehicle, but it is typically found on the back of the key fob. Look for a small slot or indentation that indicates the presence of a battery compartment.
Step 2: Open the Battery Compartment
Using a small flathead screwdriver or a plastic pry tool, gently insert the tool into the slot or indentation. Carefully pry open the battery compartment cover. Be cautious not to exert too much force to avoid damaging the key fob. Once the cover is open, set it aside in a safe place.
Step 3: Remove the Old Battery
Inside the battery compartment, you will find the old battery. Using your thumb or the screwdriver, carefully remove the battery from its slot. Take note of the battery’s orientation, as you will need to insert the new battery in the same way.
Step 4: Clean the Key Fob Contacts (Optional)
While the battery is removed, it is a good idea to clean the key fob contacts. Over time, dirt and grime can accumulate, reducing the effectiveness of the contacts. If desired, dampen a cotton swab with isopropyl alcohol and gently clean the contacts. Wipe away any residue with a clean cloth or tissue.
Step 5: Insert the New Battery
Take the new CR2032 battery and align it with the same orientation as the old battery. Insert the battery into the slot in the key fob, ensuring that it sits securely. Give it a gentle push to make sure it is seated correctly.
Step 6: Close the Battery Compartment
With the new battery in place, it’s time to close the battery compartment. Align the cover with the key fob and press it down firmly until it snaps into place. Ensure that the cover is securely closed to prevent the battery from falling out.
Step 7: Test the Key Fob
Now that the battery has been replaced, it’s time to test the key fob. Stand near your vehicle and press the buttons on the key fob to verify that it is working correctly. If the key fob is still unresponsive, double-check the battery orientation and try again. If the issue persists, you may need to seek further assistance.
Tips and Precautions
– Always use a new CR2032 battery or a battery recommended by Subaru for your key fob model.
– Take note of the battery’s orientation before removing it to ensure proper installation of the new battery.
– Be gentle when prying open the battery compartment to avoid damaging the key fob.
– Avoid touching the battery contacts with your fingers, as oils and dirt can reduce the effectiveness of the contacts.
– If your key fob continues to have issues even after replacing the battery, consult a Subaru dealership or a professional automotive locksmith for further assistance.
Changing the battery in a Subaru key fob is a simple process that can be done at home with minimal tools. By following the step-by-step guide outlined in this article, you can ensure that your key fob continues to function properly, saving you the inconvenience of a non-responsive key fob. Remember to always use the correct battery size recommended for your Subaru key fob model. With a functioning key fob, you can enjoy the convenience of unlocking and locking your vehicle at the press of a button.
Thank you for reading this guide on how to change the battery in a Subaru key fob. We hope you found it helpful and informative.
FAQs
Q: How long does the battery in a Subaru key fob last?
A: The battery life can vary depending on factors such as usage and environmental conditions. Generally, the battery in a Subaru key fob can last anywhere from one to three years.
Q: Can I use a different battery size in my Subaru key fob?
A: It is recommended to use the specific battery size (usually CR2032) recommended by Subaru for your key fob model. Using a different battery size may cause compatibility issues or damage to the key fob.
Q: Can I change the battery in my Subaru key fob myself?
A: Yes, changing the battery in a Subaru key fob is a simple DIY task that can be done at home. Just follow the step-by-step guide provided in this article.
Q: What if replacing the battery does not fix the issue with my key fob?
A: If replacing the battery does not resolve the problem, there may be an underlying issue with the key fob itself. In such cases, it is advisable to consult a Subaru dealership or a professional automotive locksmith for further assistance.
Frequently Asked Questions
How do I change the battery in my Subaru key fob?
To change the battery in your Subaru key fob, follow these steps:
What type of battery does a Subaru key fob use?
A Subaru key fob typically uses a CR2032 lithium coin cell battery.
How do I open the Subaru key fob to replace the battery?
To open the Subaru key fob and access the battery, you can use a small flathead screwdriver or a coin. Insert the tool in the small groove on the side of the key fob and gently twist to separate the two halves.
How do I remove the old battery from the Subaru key fob?
Once the key fob is open, locate the battery and gently push on the side of it to release it from its housing. Carefully remove the old battery from the key fob.
How do I insert the new battery into the Subaru key fob?
Take the new CR2032 battery and align it with the positive (+) side facing up. Insert the battery into the designated slot in the key fob, making sure it fits securely in place.
How do I reassemble the Subaru key fob after replacing the battery?
After inserting the new battery, carefully align the two halves of the key fob and press them together until they snap back into place. Ensure that the key fob is securely closed before testing its functionality.
Final Thoughts
Changing the battery in a Subaru key fob is a simple process that can be done at home. Begin by identifying the slot or button that allows access to the battery compartment. Use a small flathead screwdriver or a coin to gently pry open the compartment. Once opened, carefully remove the old battery and replace it with a new one, ensuring that the positive (+) and negative (-) ends are facing the correct direction. Close the compartment, press any button on the key fob to ensure it is working, and you’re done! Changing the battery in a Subaru key fob is a quick and easy task that can be done by anyone.
