Having a dead battery in your Chrysler 200 can be a frustrating situation, especially if you need to access the trunk. But don’t worry! We’ve got you covered with a simple solution on how to open your Chrysler 200 trunk with a dead battery. In this article, we will guide you through the steps to unlock the trunk in a conversational manner, ensuring you can easily follow along. So, if you’re grappling with a dead battery and need access to your trunk, read on to discover how to open your Chrysler 200 trunk with a dead battery. Let’s dive right in!
How to Open Chrysler 200 Trunk with Dead Battery
Introduction
Having a dead battery in your Chrysler 200 can be frustrating, especially when you need to access the trunk. Without power, the usual methods won’t work. However, there are still a few ways to open the trunk even with a dead battery. In this article, we will explore different methods and provide step-by-step instructions to help you open the trunk of your Chrysler 200 when faced with a dead battery.
Method 1: Using the Key Fob
If you have a key fob for your Chrysler 200, there is a way to manually open the trunk even with a dead battery. Here’s how:
- Locate the small access cover on the back of the key fob.
- Use a small flathead screwdriver or a coin to pry open the cover.
- Inside, you will find a physical key.
- Insert the key into the keyhole located on the trunk lid, near the license plate.
- Turn the key counterclockwise to release the trunk latch.
- Gently lift the trunk lid to open it.
This method allows you to manually unlock the trunk using the physical key inside the key fob, bypassing the need for a working battery.
Method 2: Accessing the Trunk Release Lever
If your Chrysler 200 has a rear seat pass-through feature, you can access the trunk from inside the car. Here’s how:
- Open the rear seat pass-through located in the center of the rear seatback.
- Reach into the pass-through and locate the trunk release lever.
- Pull the lever to release the trunk latch.
- Go to the rear of the vehicle and lift the trunk lid to open it.
This method allows you to open the trunk by manually activating the trunk release lever from inside the car. It is a convenient option if you have access to the rear seat pass-through.
Method 3: Calling Roadside Assistance
If you are unable to open the trunk using the above methods or don’t have the necessary tools, you can call roadside assistance for help. Most roadside assistance services have the tools and equipment to safely open the trunk without causing any damage.
When calling roadside assistance, provide them with your location, vehicle information, and the fact that your battery is dead. They will dispatch a professional who can safely open the trunk for you. While this method may take a bit longer, it ensures that the trunk is opened without causing any harm to your car.
Method 4: Jump-Starting the Battery
If you have access to jumper cables and another vehicle, you can jump-start the dead battery in your Chrysler 200. Jump-starting the battery will restore power to the car, allowing you to use the regular methods to open the trunk. Here’s how:
- Move the second vehicle close to your Chrysler 200, ensuring the jumper cables can reach both batteries.
- Connect the positive (red) jumper cable clamp to the positive terminal of the dead battery.
- Connect the other end of the positive jumper cable to the positive terminal of the charged battery.
- Connect the negative (black) jumper cable clamp to the negative terminal of the charged battery.
- Attach the other end of the negative jumper cable to an unpainted metal surface in your Chrysler 200’s engine compartment, away from the battery.
- Start the second vehicle and let it run for a few minutes to charge the dead battery.
- Attempt to open the trunk using the regular methods, such as the trunk release button or key fob.
Jump-starting the battery is an effective way to restore power to the car and regain access to the trunk.
Safety Precautions
When dealing with a dead battery and attempting to open the trunk, it’s important to keep the following safety precautions in mind:
- Wear protective gloves to avoid any contact with battery acid.
- Ensure both vehicles are turned off and in park before connecting the jumper cables.
- Follow the correct sequence when connecting and disconnecting the jumper cables to avoid electrical shock.
- Be cautious when using tools or prying open the key fob to prevent damage or injury.
By following these safety precautions, you can mitigate any potential risks while opening the trunk with a dead battery.
In situations where your Chrysler 200’s battery is dead, opening the trunk can still be achieved using alternative methods. Whether it’s using the key fob’s physical key, accessing the trunk release lever from inside the car, or calling roadside assistance, there are options available to help you gain access. Additionally, jump-starting the battery allows you to restore power and use the regular trunk opening mechanisms. Remember to prioritize safety and take necessary precautions to avoid any accidents or damage.
CHRYSLER 200 – How to open trunk
Frequently Asked Questions
How can I open the trunk of a Chrysler 200 with a dead battery?
If you have a dead battery in your Chrysler 200 and need to access the trunk, here are a few methods you can try:
What is the manual trunk release procedure for a Chrysler 200?
1. Locate the manual trunk release lever. It is usually located inside the trunk, near the latch mechanism.
2. Pull the lever to manually release the trunk latch. This should unlock the trunk and allow you to open it even with a dead battery.
Can I use the key fob to open the trunk of a Chrysler 200 with a dead battery?
Yes, you can typically use the key fob to open the trunk of a Chrysler 200 even with a dead battery. The key fob usually has a separate button designated for trunk release. Look for a small button or symbol on the key fob that resembles an open trunk. Press and hold this button for a few seconds, and the trunk should unlock and open.
Is there a way to jump-start the Chrysler 200 to access the trunk?
Yes, if you have jumper cables and access to another vehicle with a working battery, you can jump-start the Chrysler 200 to gain access to the trunk. Connect the positive (red) cable to the positive terminal of the dead battery, and then connect the other end of the positive cable to the positive terminal of the working battery. Next, connect the negative (black) cable to the negative terminal of the working battery, and attach the other end of the negative cable to a suitable ground point on the Chrysler 200, away from the dead battery. Once the connections are secure, start the vehicle with the working battery, and after a few minutes, try using the trunk release button or the manual trunk release lever inside the car to open the trunk.
What if none of the above methods work to open the trunk of a Chrysler 200 with a dead battery?
If none of the previous methods work, it is recommended to contact a professional locksmith or a dealership for assistance. They have specialized tools and knowledge to open the trunk without causing any damage to the vehicle.
Final Thoughts
To open the trunk of a Chrysler 200 with a dead battery, follow these simple steps. First, locate the keyhole on the trunk lid. Insert the mechanical key into the keyhole and turn it counterclockwise. This will manually release the trunk latch, allowing you to open the trunk. Keep in mind that this method only works if you have a traditional key that can be inserted into the keyhole. By following these steps, you can successfully open the Chrysler 200 trunk with a dead battery.
