Looking to replace the battery in your Subaru key fob? We’ve got you covered! In this article, we’ll walk you through the simple steps to ensure your key fob is back in action in no time. No need to worry about costly trips to the dealership or complicated procedures – we’ve streamlined the process for you. So, if you’re ready to give your Subaru key fob a new lease on life, keep reading and we’ll show you exactly how to replace the battery in a Subaru key fob. Let’s get started!
How to Replace the Battery in a Subaru Key Fob
Introduction
The key fob is an essential component of modern car ownership, allowing you to lock and unlock your vehicle remotely, as well as perform other functions like opening the trunk or activating the panic alarm. As with any electronic device, the battery in your Subaru key fob will eventually need to be replaced. In this article, we will guide you through the process of safely and easily replacing the battery in your Subaru key fob. Follow these steps to ensure your key fob works reliably and keeps you securely connected to your vehicle.
Step 1: Determine the Key Fob Type
Before you can replace the battery in your Subaru key fob, you need to identify the key fob type. Subaru offers various key fob designs, and each may have a slightly different battery replacement method. The two common types are:
- Standard Key Fob – Rectangular shape with buttons
- Smart Key Fob – Proximity-based keyless entry system
Standard Key Fob
If your Subaru key fob is the standard rectangular type, follow the instructions below to replace the battery.
Smart Key Fob
If your Subaru key fob is the smart key type, continue reading to learn how to replace the battery.
Step 2: Gather the Required Materials
Before you begin the battery replacement process, make sure you have the necessary materials. Here’s what you’ll need:
- New compatible battery – Check your vehicle’s owner’s manual or consult with a Subaru dealer to determine the correct battery type for your key fob.
- Small, flathead screwdriver or a plastic prying tool – To open the key fob casing.
- Clean cloth or tissue – For cleaning the key fob.
Step 3: Prepare your Work Area
Creating a clean, well-lit work area will make the battery replacement process easier and help prevent losing any small components. Follow these steps to prepare your work area:
- Find a clean, flat surface to work on, preferably a table or desk.
- Ensure you have proper lighting to see the key fob components clearly.
- Lay down a clean cloth or tissue to protect the key fob from scratches.
Step 4: Open the Key Fob Casing
To access the battery compartment, you’ll need to open the key fob casing. Follow these steps:
- Take the small, flathead screwdriver or plastic prying tool.
- Locate the small indentation or slot on the edge of the key fob.
- Insert the screwdriver or prying tool into the indentation and gently pry open the key fob casing.
- Work your way around the edges, applying slight pressure until the casing pops open. Be careful not to break any plastic clips.
Step 5: Remove the Old Battery
Now that you have opened the casing, it’s time to remove the old battery. Follow these steps:
- Locate the battery inside the key fob. It is typically a small, round silver disc.
- Using your fingers or a non-metallic tool, carefully lift the battery out of its compartment.
- Take note of the battery’s orientation and make sure to install the new battery in the same way.
- Dispose of the old battery properly, following local regulations for battery disposal.
Step 6: Install the New Battery
With the old battery removed, it’s time to install the new battery. Follow these steps:
- Take the new battery and ensure it matches the correct type recommended for your Subaru key fob.
- Insert the new battery into the battery compartment, making sure it is properly oriented.
- Press down gently on the battery to ensure it is securely seated in the compartment.
Step 7: Close the Key Fob Casing
Once the new battery is installed, it’s time to close the key fob casing. Follow these steps to securely close the casing:
- Align the two halves of the key fob casing, ensuring all buttons are properly aligned.
- Apply gentle pressure to snap the casing back together. Make sure all the plastic clips engage securely.
- Press all around the edges to ensure the casing is secure and there are no gaps.
Step 8: Test the Key Fob
After replacing the battery and closing the casing, it’s important to test the key fob to ensure it is functioning correctly. Follow these steps to test your Subaru key fob:
- Stand near your vehicle and press the lock and unlock buttons to verify if the key fob is working.
- If the key fob is working properly, you will see the vehicle respond by locking and unlocking its doors.
- If the key fob does not appear to be working, double-check the battery installation and casing closure.
Replacing the battery in your Subaru key fob is a simple process that can be done at home with minimal tools. By following the steps outlined in this article, you can ensure that your key fob continues to work reliably, allowing you to conveniently access and secure your vehicle. Remember to always use the correct battery type recommended for your key fob and dispose of the old battery properly. Now you’re ready to keep your Subaru key fob powered up and ready to go!
Frequently Asked Questions
How do I replace the battery in my Subaru key fob?
To replace the battery in your Subaru key fob, follow these steps:
What type of battery does a Subaru key fob use?
A Subaru key fob typically uses a CR2032 battery.
Where is the battery located in a Subaru key fob?
The battery in a Subaru key fob is usually located on the backside of the fob. You will need to open the key fob to access it.
How do I open my Subaru key fob to replace the battery?
To open your Subaru key fob, you can use a small flathead screwdriver or a coin. Insert the tool into the small gap or slot along the edge of the fob and gently pry it open.
Can I replace the battery in my Subaru key fob myself?
Yes, you can replace the battery in your Subaru key fob yourself. The process is relatively simple and can be done at home.
Do I need to reprogram my Subaru key fob after replacing the battery?
In most cases, you do not need to reprogram your Subaru key fob after replacing the battery. However, if you notice any issues with the fob’s functionality after battery replacement, it is recommended to consult your vehicle’s owner’s manual or contact a Subaru dealer for further assistance.
Final Thoughts
To replace the battery in a Subaru key fob, follow these simple steps. First, locate the small groove on the fob and use a flathead screwdriver or a coin to open it. Next, carefully remove the old battery and insert a new one, making sure the positive side is facing up. Then, close the fob by aligning the groove and applying slight pressure until it snaps shut. Finally, test the key fob to ensure it is working properly. By following these steps, you can easily replace the battery in your Subaru key fob and enjoy uninterrupted use.
